- Building & Construction >
- Building material >
- Smoothing mortar
Smoothing mortars
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Capacity in Kg: 25 kg
... self-buttering, quick-setting grey cementitious adhesive for ceramic tiles and stone material. N.B. May also be used for smoothing internal and external surfaces. TECHNICAL DATA: Where to use: floors only. Pot life ...
MAPEI
... horizontal and vertical gypsumboard surfaces. Ideal for creating thin skimming veils over the entire surface of the slab, smoothing ridges and grooves visible under the effect of grazing light.
San Marco
High-whiteness filler for levelling out imperfections, cracks and hollows on horizontal and vertical gypsumboard surfaces. Ideal to obtain an even, flat and continuous surface, easy to sand, for basic needs.
San Marco
... thixotropic filler allows you to fill considerable thickness in a single application, without dripping. Suitable both for smoothing minimal thicknesses, and for filling larger cavities on gypsumboard surfaces. Dries ...
San Marco
Capacity in Kg: 25 kg
PaRis 2.0 is a semi-dry mortar for underfloor heating, reinforced with metallic fibres to obtain a high thermal conductivity (lambda 2.02 W/mK), ideal for underfloor heating systems. Pre-mixed and bagged, ready for ...
Capacity in Kg: 25 kg
... a self-levelling screed for application in low thickness, ideal as a screed for thin underfloor heating systems and for smoothing and levelling uneven subfloors prior to the installation of floor coverings: it can be ...
Liquid cushioning high-thickness mortar, formulated with water based resins and granular aggregates, to be use as sublayer for multi-purpose sport court. Sportgum is a liquid one component high-thickness mortar, ...
One component thick liquid coating, formulated with water based resin and granular aggregates, to be used as substrate of multi - purpose courts. Floorgum Antracite is a one component thick liquid coating, formulated with water based ...
Capacity in Kg: 20 kg
Quick-setting and fast drying cementitious self-leveller for levelling of substrates with thickness between 3 and 40 mm. Suitable for underfloor heating. For interiors and exteriors. Fibre-reinforced. Product with very low volatile organic ...
Capacity in Kg: 20 kg
Ultra-quick-setting and fast drying cementitious self-leveller for levelling of substrates with thickness between 1 and 15 mm. Suitable for underfloor heating. For interiors. Product with very low volatile organic compound emission rate. advantages ...
Capacity in Kg: 20 kg
Quick-setting and fast drying cementitious self-leveller for levelling of substrates with thickness between 3 and 40 mm. Suitable for underfloor heating. For interiors. Fibre-reinforced. Product with very low volatile organic compound ...
Capacity in Kg: 15 kg
... replacement mortar, isolera BI mortar is mineral, cementitious, fast-setting and water pressure-tight. It is used for repairing and sealing structures against water under pressure and ...
Epoxy resin mortar EP-E 200 is an epoxy resin-bound screed for low layer thicknesses for levelling joints, holes and height differences. It is a universally applicable screed consisting of special sand and epoxy resin ...
Capacity in Kg: 25 kg
Soil leveling compound F is a self-leveling substrate for floor coverings, a self-leveling leveling compound for critical substrates such as wood, boards and chipboard. Suitable for use in the thin-film heating system. For permanent compensation ...
... concrete Cement-based smoothing mortar for surface restoration, grain size 0-0.5 mm Premixed Natural Hydraulic Lime scratch coat mortar Mortar for plastering, masonry ...
FIBRE NET
Levelling and waterproofing in a single solution BI MORTAR RASO SEAL is a spatula-applied fibre-reinforced cement-based levelling compound. This creates a continuous waterproof coating. Where to use it Waterproofing ...
VOLTECO
Capacity in Kg: 20 kg
Certified, eco‑friendly, breathable, anti‑alkali and chlorine‑resistant, mineral membrane for the flexible waterproofing with high levels of adhesion and durability of substrates before laying with adhesives. Floors and walls, ...
COLORSIVIT COMPOUND (NEUTRAL/WHITE) WATERBORNE EPOXY MORTAR (A+B). Two component waterborne product based on epoxy resins, suitable for smooth or as semi self-levelling mortar, with: – Excellent adhesion ...
WATERBORNE MORTAR FOR FLOORS (A+B+C). Three pack product: A – waterborne amine resin B – epoxy resin C – pre-prepared product, based on inert and inorganic additives By mixing the components, the polymerization process ...
Usages Industrial floors coatings with high superficial wear. Storages and warehouses floors, with intensive traffic. Substrate The substrate must have a minimum resistance to compression of 25 N/mm2 and to traction of 1,5 ...
Profile Adhesive · Cement-bound dry mortar premix for bonding Capapor Façade Profiles Field of Application Special adhesive for bonding Capapor Façade Profiles. Material Properties Easy to apply, smooth and easy ...
LIME SCREED by OIKOS is a screed formulated with lime putty. It is non shrinking, filling, smoothing and easily to apply. Adhesion is very good on exterior surfaces. The product creates a stable link with the surface, ...
RASOCEM RA is a premixed mortar ready to be used for finishing, adjustment and filling of thin thickness.
RUREDIL
Weber Industries
... suitable for outdoor and indoor, new construction or renovations. The Alsan® 075 surfacer is used as a lean mortar or a gradient levelling mortar for subsequent Alsan® 770 coating systems. IMPLEMENTATION The ...
Capacity in Kg: 25 kg
Factory batched, through-coloured top coat mortar most suited to scrape texturing. Through-coloured UV Resistance Water Resistance Algae Resistance About this product weberend TTS is a cost-effective decorative topcoat ...
Weber
... hydraulic-lime mortar for smoothing. Natural composition, highly breathable. Composition Product made with NHL 3.5 lime, natural puzzolana pozzolanic selected aggregates and other additives. Features ...
GRUPO PUMA
... Fibers, plaster sand, hydrated lime, and Type I or I-II portland cement to produce a cementitious base coat for Finestone Base Mortar System and Finestone Impact-R Class PM EIFS or as a leveling agent for masonry and ...
... workability of every batch. Dry silo mortar combines all the benefits of factory produced mortar, such as consistent quality and colour, with technology to provide a convenient, highly efficient solution ...
Description Ronafix Pre-packed Screed 6-50mm is a high strength prepacked polymer modified mortar for thin section, high strength, waterproof screeds. It is strong, durable and resistant to water and frost attack. Uses Thin ...
Ronacrete Limited
Limelite Heritage Mortar is a lime based low strength pointing mortar. In its dry form Limelite Heritage Mortar is a white powder and mixes with water to give an off white mortar.
Tarmac Building Products
For use with PowerPanel HD boards
parexlanko
Fast, pourable and strong repairs for deep holes For holes between 10-200mm Just add water, mix and pour Fibre reinforced for added strength Forklift traffic in just 2 hours Watco Flowpatch Deep Fill® is ideal for repairing or ...
WATCO GmbH
Capacity in Kg: 22 kg
Make light work of plasterboard jointing. This ready-mixed joint cement makes it quick and easy to achieve a fantastic finish when jointing plasterboard. Gyproc ProMix Lite has great workability and gives you a durable, super-smooth ...
British Gypsum Limited
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining