Length: 65, 78, 134, 165 mm
... Fire protection plug is a soft, flexible foam molding for permanent or temporary fire insulation of all types of electrical cables. For preventive structural fire protection. Cable penetration seal for rigid walls, rigid floors and ...
Length: 200, 170 mm
Width: 144, 120 mm
Thickness: 60 mm
... Fire protection block is a soft flexible foam molding, for different systems. For temporary as well as permanent fire protection of electrical cables and pipes of all types and diameters as well as flammable and non-combustible pipes. Mixed penetration ...
... KEMPERTHERM® is a CFC- and HCFC-free, rigid PIR insulation board used as part of the Stratex warm roof system with a dense, closed cell structure that gives excellent compressive strength and low thermal conductivity. KEMPERTHERM® ...
... made with all types of insulating panels for ETICS use. Rinforzo V 40 ensures finishing continuity on insulating panels and prevents the formation of cracks. High‑performance tensile strength Specifically designed ...
Thermal conductivity: 0.038 W/(m.K)
Thickness: 30 mm - 300 mm
... EPS panel for thermal insulation Use The EPS panels are used in external thermal insulation composite systems of new buildings and for restoring old ones. The type of board and thickness ...
Fassa Bortolo
Thickness: 4 cm - 12 cm
... of kg/m², reinforced in TNT polyester and slate chips’ finish The bonded panels GT 3 - GT 4 - GT 5 are suggested for insulation and as a waterproofing primer of flat and pitched roofs. Standard Dimensions: 1200 x 1200mm Standard ...
Stiferite
Thermal conductivity: 0.022, 0.023 W/(m.K)
Length: 242 cm
Width: 100 cm
... that occur when insulating covings and dormers are simply turned over and fitted on the opposite side finished. That saves material and time. With anti-glare surface With printed grid for fast installation Thermal ...
Linzmeier Bauelemente GmbH
Thermal resistance: 1.49, 3.23, 4.52 m²K/W
Length: 1,205 mm
Width: 760 mm
... efficient than other EPS products. The BorjaSAT insulation panel is manufactured in three thicknesses: 60, 100 and 140 mm. It has a thermal conductivity coefficient of λ=0.031 W/m·K to meet the thermal ...
... Continuous Insulation System Dri-Design has always held performance at the forefront of everything we do, resulting in one of the highest tested systems on the market. With the Dri-Design Continuous Insulation System, ...
Thermal conductivity: 0.189 W/(m.K)
... reinforced calcium silicate board, based on PROMAXON®-technology. Non-combustible (A1) in accordance with EN 13501-1. Good thermal insulation and stability during fire exposure. Easy workability with machine and hand ...
Promat
Thermal conductivity: 0.08, 0.081 W/(m.K)
Thickness: 10 mm - 75 mm
... New construction and renovation for perimeter insulation in building construction with excellent insulation value Special features: • Suitable as light aggregate in gardening and landscaping. • High stability ...
MISAPOR
Thermal resistance: 1.9 m²K/W - 6.3 m²K/W
Thickness: 7 cm - 21 cm
Placoplatre
Thermal conductivity: 0.031, 0.032 W/(m.K)
Thickness: 50 mm - 165 mm
... Ravatherm™ combines proven features of STYROFOAM™ with up to 20% higher insulation properties made possible by a new manufacturing process using CO2 and reflecting particles in the foam cells. For use in floors, basements, flat and pitched ...
A. PROCTOR GROUP
Thickness: 40 mm
... CHARACTERISTICS: Joint: R – residential Width (mm): 500 Thickness (mm): 40 External finish: L (smooth) Internal surface: flat / ribbed Internal finish: GS (stucco) Profile height: standard ...
Thermal conductivity: 0.035 W/(m.K)
Thickness: 4 mm - 80 mm
... special coating, they are ready to be tiled, rendered or plastered. Their excellent thermal insulation properties make them ideal for use as effective thermal insulation. The construction ...
Jackon Insulation
thermal insulationDUODRAIN PF HR L / DUODRAIN PF N III L
Thermal conductivity: 0.034, 0.036, 0.029 W/(m.K)
Thermal resistance: 1.5 m²K/W - 4.15 m²K/W
Thickness: 50 mm - 120 mm
URSA France
Thermal conductivity: 0.043, 0.04, 0.037 W/(m.K)
Thermal resistance: 0.9 m²K/W - 6.45 m²K/W
Length: 600, 1,200, 1,325, 2,600, 2,800 mm
... renovation of walls Robust and economic on-site handling Manufactured in dry process. Lightweight homogenous boards. Excellent thermal characteristics in summer and winter Hydrophobic and water vapour open system for robust constructions ...
STEICO
... Insulation made from PIR-foam, available in a broad variety for above rafter insulation on the roof and and floor insulation. ...
Thermal conductivity: 0.024, 0.025, 0.026 W/(m.K)
Thermal resistance: 0.96 m²K/W - 6.65 m²K/W
Thickness: 25 mm - 160 mm
... CARLISLE® Thermal Insulation-T is a high performance tissue faced insulation board that has been specifically designed for use with award-winning RESITRIX® and HERTALAN® waterproofing membranes, in both ...
CARLISLE Construction Materials GmbH
Thermal conductivity: 0.037 W/(m.K)
Thickness: 40 mm - 240 mm
... Flexible woodfibre insulation board Between-stud insulation in timber frame, post and beam interior and exterior wall structures Between-rafter insulation Ceiling insulation Partitions/ ...
... sheets integrated with metal panels and insulation in a complete metal roofing system. Metal panels bring unmatched durability. Insulation can build R-value into the system. Fabral technology has gone beyond insulation ...
FABRAL
Thermal conductivity: 0.038 W/(m.K)
Thermal resistance: 1.05 m²K/W - 5.25 m²K/W
Length: 1,220 mm
Thermal conductivity: 0.023 W/(m.K)
Thickness: 3 cm - 12 cm
... PLUS is an insulating system obtained through the hot bonding of a smooth or mineralcoated plastomeric waterproofing membrane reinforced with glass fibre non-woven polyester fabric to sheets of foam PUR/PIR rigid polyisocianurate with ...
Polyglass Spa
Thermal conductivity: 0.028, 0.025 W/(m.K)
Thermal resistance: 1.05 m²K/W - 6.4 m²K/W
Thickness: 30 mm - 160 mm
... POLIISO® SB is a yellow thermal insulation panel made of rigid, closed-cell PIR foam, expanded between two supports: the top one is made of bituminized glass fiber and the bottom one of saturated glass ...
Ediltec
... high density expanded polystyrene (EPS) radiant heat insulation product that increases installation speeds, is easily cut to meet any angle or radius while providing R-10 of insulation value. Insulation ...
the best suppliers