Waterproofing membranes with vapor barrier

ANTIRADICE E is a high performance elastomeric prefabricated waterproofing membrane made out of distilled bitumen modified with SBS polymers and a reinforcement of heavy-weight non-woven staple polyester ...

BITEXTENE FLEX MT waterproofing membranes are obtained by coextrusion of a compound with a special elastomeric formulation, obtained from a complex dispersion of elastofin rubbers and copolymers in selected ...

Schlüter®-KERDI is a crack bridging waterproof membrane made of soft polyethylene, which has been covered on both sides with a special fleece webbing to anchor the membrane in suitable tile adhesive. Schlüter®-KERDI ...

ANTIROCK® RSI membrane is a torchable partial bonded waterproofing membrane made from polymer modified bitumen (SBS elastomer) with a non-woven polyester reinforcement mesh (180g/m²). The ...

IKO POWERGUM is a waterproofing membrane composed of plastomer (APP) bitumen with fire-retardant properties and a polyester-glass composite inlay. The upper surface is finished with dark slate or talc/sand ...

... a new wall membrane composite, which will improve airtightness levels whilst at the same time addresses the need to reduce thermal bridging, particularly in refurbishment projects. Wraptherm is a high-performance ...

PENEBAR SW 55 creates a physical barrier against water penetration through cast-in-place concrete joints that expand (in a controlled fashion) when exposed to water.Its superior ability to expand and seal concrete joints ...

Thermoplastic waterproofing membrane with active polymer core (APC). Setting the standard for waterproofing membrane strength, durability and performance for more then ...

The alwitra contribution not just for a good climate on the construction site: EVALASTIC® waterproofing membranes are special EPDM membranes combining the requirements for a high-quality, ...

non-self-protected membrane, made of APP plastomeric bitumen, with a high softening point, reinforced with fibre glass felt (FV), and finished with a thermally bonded film on both the upper and lower side. Advantages ✔ ...

Wetguard® 200 SA The diffusion open, robust and non-slippery membrane is suitable for use as moisture protection for timber elements during the construction phase, in particular for the full bonding of timber floors. rainproof ...

... to traditional root resistant membranes,SCUDOGARDEN PP’s special additive means that the membrane is root resistant throughout its whole length, breadth and thickness, instead of having a polyester film ...

Vapour-permeable wind barrier. Made of polyester nonwoven and polymer coating. Product is characterized by extreme resistance to UV radiation which allows exposure for up to 12 months. Membrane is available ...

... assured you are using the brand leader in weather resistant barriers. A weather resistant barrier is a building's main protection against the damaging effects of the elements. A functioning barrier ...

... inside.Non-reinforced bituminous waterproofing membrane made of bitumen with polymer additives, with metallic self-protection, of the type LA-30/M-NA. Composition It is composed of mastic made of ...

... and windy climates. STRENGTHS This membrane is waterproof on-site.It provides expansion and tightness whatever the composition of the water it comes in contact with.It is ideal for retaining walls and barrier ...

ALUVAPOR TENDER is an elastoplastomeric membrane realised with a compound having a –5°C cold flexibility and a special reinforcement consisting in a goffered aluminium foil with a 40 micron thickness, matched with a glass tissue.

Rhepanol hg means waterproofing and root penetration protection in a single membrane. It is used for high-quality roofing combined with extensive or intensive vegetation. The durability of the roofing ...

DERBIGUM NT is a bituminous waterproofing membrane that thanks to the addition of New Technologies, opens the door to the design of ecological roofs according to the principle of circular economy. When ...

Self-Adhesive Bituminous Membrane Self-Protected with Polypropylene Mesh Elotene HD is a self-adhesive bituminous waterproofing membrane self-protected by an HD polypropylene mesh. This ...

... in the air gap. Generally the thickness of the insulation should be limited to 50 mm. It is not advisable to have a vapour barrier between the insulation and the cladding, although the cladding should be airtight. The ...