Micro-multiwall corrugated overlapping panels with UV protection on the external side, which allow for maximum illumination of indoor environments with natural light. A range that is continuously updated to meet the needs of the construction sector; in fact, these products have greca square wave and circular wave corrugated profiles compatible with the most used insulated roofing panels. Thanks to the possibility of lateral overlapping, TegoPlus panels are suitable for the creation of greca square wave corrugated continuous roofing, intra-pitch skylights and ridge-eaves skylights for greenhouses/depots/industrial buildings/verandas/garages and countless other DIY needs. To improve the technical performance of the skylights, a false ceiling is often combined with our Velario® multiwall sheets. As indicated by the appropriate symbol, for some profiles correct lateral overlapping of greca square wave corrugated panels provides for the overlapping of at least one complete greca (high + low).
Fastening
TEGOPLUS® sheets must be fastened at the structures on each high greca, with 6.3x80 mm screws, equipped with gaskets supplied by Dott.Gallina. The use of other types of fasteners can alter the strength of the sheets. For fastening, pre-drilling with a metal tip
Sheet cutting
TEGOPLUS® sheets can be cut with a small-toothed circular saw, at high rotation speed, taking care to advance slowly. Jigsaws or shears can also be used. In any case, it is important to support the sheet near the cutting point and eliminate the dust produced during cutting.
Protrusion
At the end of the roofing, the sheets must not protrude beyond the eaves by more than 100 mm