Sheet sound-insulating underlay EASYMAT

polyethylenefor floor panels

EASYMAT is a resilient underlay made of closed cell expanded polyethylene, 5 and 9 mm thick, grey in color, and characterized by a flat surface. The product is totally waterproof. • Impact sound insulation suitable for heavy floors. • Good dynamic stiffness. • Suitable for construction sites where high speed of installation is required. • 10 cm width adhesive tape included in the delivery. The installation of EASYMAT must take place without glue. The resilient underlay flaps should be juxtaposed, with no overlap, and must be sealed using the adhesive tape of 10 cm width included in the delivery of the product. Before the EASYMAT installation you will have to realize the perimeter disconnection with the appropriate FLEXO polyethylene strip, which is to be applied along the perimeter of the room without leaving out the thresholds of the entrances and the doors and windows. The FLEXO strip must be cut only after laying the finished floor. The whole floor area must be covered by the resilient underlay, leaving no point of contact. In presence of the underfloor heating system, this will only be installed after the impact sound insulation installation. The best performance of the product is obtained with the realization of a splitter screed with a mass of between 100 kg/m2 and 200 kg/m2.