{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Thermal conductivity: 0.04 W/(m.K)
Thickness: 60 mm - 220 mm
... cladding insulation that also offers thermal and acoustic benefits. ROCKWOOL Cladding Roll has been specifically developed for use as an economical solution for projects that require dimensionally stable, consistent thermal ...
ROCKWOOL
Supafil is unbonded, virgin glass blowing insulation designed with optimal thermal and acoustic properties and excellent coverage and blowing characteristics. Blowing Wool is a highly cost efficient insulation ...
... radiation and low temperatures, flat roofs are exposed to extreme fluctuations in temperature, high thermal loads, and stress, placing very high demands on the seal and thermal insulation. In inverted ...
ISOVER SAINT-GOBAIN
Thickness: 6 cm - 24 cm
ISOVER SAINT-GOBAIN
ISOVER SAINT-GOBAIN
Thermal conductivity: 0.04 W/(m.K)
Thickness: 60 mm - 220 mm
... cladding insulation that also offers thermal and acoustic benefits. ROCKWOOL Cladding Roll has been specifically developed for use as an economical solution for projects that require dimensionally stable, consistent thermal ...
ROCKWOOL
Thickness: 30 mm
... the most challenging part of a flat roof to insulate and seal. HARDROCK® Multi-fix Angle Fillets have been specifically designed to create a smooth transition between such interfaces, for effective flat roof ...
ROXUL
... the specialist for roofs Roof insulation of new and existing buildings is the main area of application for the polyurethane spray foam Skytite®. Insulating flat or ...
Thermal conductivity: 0.032, 0.037, 0.039, 0.049, 0.054 W/(m.K)
Thickness: 25, 40, 50 mm
... mineral wool roll that provides a cost effective thermal and acoustic insulation for circular ductwork. The CLIMCOVER Roll Alu2 range is an efficient and cost effective glass wool insulation. It is ...
ISOVER SAINT GOBAIN
Thermal conductivity: 0.035 W/(m.K)
Thickness: 30, 60, 80 mm
Ideal for insulating roof rafters in interior construction: JACKODUR® Insulation Strip. JACKODUR® Insulation Strip made of extruded polystyrene foam (XPS) are specially ...
Jackon Insulation
Thermal conductivity: 0.027 W/(m.K)
Thickness: 50 mm - 320 mm
... Ideal application: Inverted roof (gravel-covered, green, patio roof) Top floor ceiling insulation Basement retaining wall insulation Soil-contact insulation ...
Jackon Insulation
Thermal conductivity: 0.034, 0.035, 0.036 W/(m.K)
Thickness: 30 mm - 320 mm
... installation Proven durable thermal insulation Ideal application: Perimeter insulation (slab and foundation slab) Basement retaining wall Inverted roof (gravel-covered, green, ...
Jackon Insulation
Thermal conductivity: 0.055 W/(m.K)
Thickness: 50 mm
... noise in roofs with a wooden structure. Thanks to its composition consisting of materials of different density and elasticity it is set up as an important acoustic package, also functional to the achievement of excellent ...
Isolmass is the alternative sound insulation solution. Trocellen developed Isolmass in order to satisfy those customers who prefer not using lead with their sound insulation solutions. Isolmass products ...
A chemically cross-linked polyethylene foam, laminated with aluminium film, which ensures the stability of the mechanical and thermal characteristics, can be used as a vapour barrier and also for reflecting heat.
Providing an excellent vapour barrier and a high capacity to reflect radiated heat, Trocellen ALU is suitable for Roof tile liners. The surface layer of aluminium avoids the development of sediments, mould or parasites.
Dark cork panel for thermal and acoustic insulation of cavity walls, walls, roofs and ceilings. Cork panel for the thermal and acoustic insulation of buildings, made of expanded cork ...
Thermal conductivity: 0.04 W/(m.K)
Thermal resistance: 1 m²K/W - 5 m²K/W
Thickness: 40 mm - 200 mm
Rigid insulation board for external applications (roofs and walls) Applied over the rafters or studs to improve insulation values 3 fold functionality; insulation, ...
STEICO
Thermal conductivity: 0.04 W/(m.K)
Thermal resistance: 0.5 m²K/W - 6.25 m²K/W
Thickness: 20 mm - 250 mm
... Pitched roof with rigid insulation over slab, Flat tapered roof, Traditional flat roof, Green roof, Pitched roof with above rafter insulation, ...
Amorim Isolamentos SA
Thermal conductivity: 0.023 W/(m.K)
Thickness: 3 cm - 12 cm
POLYSOL IP 35 PLUS is an insulating system obtained through the hot bonding of a smooth or mineralcoated plastomeric waterproofing membrane reinforced with glass fibre non-woven polyester fabric to sheets of foam PUR/PIR ...
Polyglass Spa
multi-layer reflective thermal insulation that blocks the transmission of heat by radiation. It consists of 18 layers of aluminised PET, sheep's wool and PE foam. It is suitable for application on exterior roofs, ...
multi-layer reflective thermal insulation that blocks the transmission of heat by radiation. It consists of 15 layers of aluminised PET, PET wadding and PE foam. It is suitable for application on exterior roofs, ...
Thickness: 15 mm - 75 mm
... and acoustic insulation board, consisting of mineralized fir wood wool bound with Portland cement. It complies with EN 13168 standard. High thermal insulation, high thermal inertia performance in summer ...
PVC 40 foam core PVC foam offers optimal stiffness-to-weight-ratio, good impact strength , water resistance, thermal insulation, low resin absorption and high fatigue resistance. PVC foam is also self extinguishing therefore ...
Cel Components s.r.l.
PVC 48 foam core PVC foam offers optimal stiffness-to-weight-ratio, good impact strength , water resistance, thermal insulation, low resin absorption and high fatigue resistance. PVC foam is also self extinguishing therefore ...
Cel Components s.r.l.
PVC 60 foam core PVC foam offers optimal stiffness-to-weight-ratio, good impact strength , water resistance, thermal insulation, low resin absorption and high fatigue resistance. PVC foam is also self extinguishing therefore ...
Cel Components s.r.l.
Thermal conductivity: 0.022 W/(m.K)
Thickness: 50 mm
Design for areas with high risk of water leakage: for insulation of roofs, grounds, showers and bathrooms, etc Dimensions: 600х1200х50 mm Core material: PIR Premier Coating: Vinyl film Package: ...
Thermal conductivity: 0.041 W/(m.K)
Thickness: 50 mm - 150 mm
... mineral wool thermal insulation boards. Width 1000 — 2400 mm Height 100 — 102 mm Thickness 50 — 150 mm Basic information Lamella STANDART are used for insulation of standard buildings or areas ...
Insulation system for roofs: Easy to place - Adaptable insulating power - Own ventilation - Washable soffit
Thermal resistance: 1.27 m²K/W
Thickness: 72 mm
The Phonotech® DK40 element is based on the floating roof principle through its spring batten providing a mass-spring-mass effect. Due to its RD40 start and end battens, the Phonotech DK40 system forms an intuitive complete ...
Phonotech sprl
Thermal resistance: 1.84 m²K/W
Thickness: 82 mm
The Phonotech® DK60 element is based on the floating roof principle through its spring batten providing a mass-spring-mass effect. Due to its RD60 start and end battens, the Phonotech DK60 system forms an intuitive complete ...
Phonotech sprl
Thermal resistance: 2.41 m²K/W
Thickness: 102 mm
The Phonotech® DK80 element is based on the floating roof principle through its spring batten providing a mass-spring-mass effect. Due to its RD80 start and end battens, the Phonotech DK80 system forms an intuitive complete ...
Phonotech sprl
Thermal conductivity: 0.036 W/(m.K)
Thermal resistance: 1.4 m²K/W - 8.45 m²K/W
Thickness: 5 cm - 30 cm
Placoplatre
Thickness: 4 mm
... REFLEX® reflective sheet is perfect for the insulation of Roofs and Ducts, due to its lightness, manageability and easy application, creating the necessary comfort during its construction. SPACE REFLEX® ...
Thermal conductivity: 0.038 W/(m.K)
Thickness: 8 mm
... REFLEX® reflective sheet is perfect for the insulation of Roofs and Ducts, due to its lightness, manageability and easy application, creating the necessary comfort during its construction. SPACE REFLEX® ...
Thermal conductivity: 0.05 W/(m.K)
Thickness: 8 mm
... ® reflective sheet is perfect for the insulation of walls, Roofs and Ducts, due to its lighness, manageability and easy application, creating the necessary comfort during its construction. SPACE REFLEX® ...
Thermal conductivity: 0.048 W/(m.K)
Thickness: 18, 22, 28, 35 mm
... construction Ideal for upgrading the thermal insulation of existing structures Superior thermal storage capacity provides outstanding insulation against heat in summer and cold in winter Improves acoustic ...
GUTEX
Thermal conductivity: 0.039, 0.038 W/(m.K)
Thickness: 40 mm - 240 mm
Flexible wood fibre insulation for construction Wood fibre insulation CE norm: EN 13171 - TEC LVL and FiberT Dry conditions - service class 1 Non-structural DESCRIPTION Flexible wood fibre insulation ...
Please specify:
Help us improve:
remaining