- Building & Construction >
- Insulation and sealing >
- Facade insulation
Facade insulation
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

Thermal conductivity: 0.04 W/(m.K)
Length: 2,200 mm - 5,000 mm
Width: 2,200 mm - 5,000 mm
Non-combustible insulation for built-up metal walls and roofs Cladding Roll is a stone wool insulation specifically developed for use within twin skin systems. In addition to thermal ...
ROCKWOOL

Thermal conductivity: 0.027, 0.025 W/(m.K)
Thickness: 15 mm - 80 mm
... significantly reduced thermal conductivity. This means that thermal insulation is improved by up to 27 % in comparison to previous JACKODUR® CFR products. The result is thinner insulation material thicknesses ...
Jackon Insulation

Thermal conductivity: 0.025, 0.027 W/(m.K)
Thickness: 15 mm - 80 mm
... significantly reduced thermal conductivity. This means that thermal insulation is improved by up to 27 % in comparison to previous JACKODUR® CFR products. The result is thinner insulation material thicknesses ...
Jackon Insulation

Thermal conductivity: 0.035 W/(m.K)
Thickness: 2.8 mm - 45 mm
... produced in customised formats. Product Characteristics: Small batches Customised formats Moisture resistant Superb insulating properties Dimensionally stable Superb mechanical properties
Jackon Insulation

Thickness: 11 cm
... to the good performance / cost ratio, ALUCELL panels with primer coated skins are used as a support for coatings to create interior walls, false ceilings, floors, furniture elements, etc. ALUCELL panels ...
Alucel

Thermal conductivity: 0.046 W/(m.K)
Thermal resistance: 2.6, 1.3, 1.7, 2.15 m²K/W
Thickness: 60, 80, 100, 120 mm
Rigid insulation board for external applications (roofs and walls) 3-fold function: Insulation, wind-proof layer, secondary weather protection layer Excellent insulation against cold ...

Thermal conductivity: 0.037 W/(m.K)
Thermal resistance: 1.05 m²K/W - 8.1 m²K/W
Thickness: 40 mm - 160 mm
... APPLICATION : Roof insulation on fully supported substrate. Insulation for CLT walls. External insulation for Masonry and Timber frame construction in combination with a rain screen ...


thermal insulationCELLOMUR® COURBE
Thermal conductivity: 0.038 W/(m.K)

Thermal conductivity: 0.032 W/(m.K)
Thermal resistance: 5, 3.15, 3.75, 4.4 m²K/W
Thickness: 101, 120, 141, 160 mm
URSA France

Thermal conductivity: 0.003 W/(m.K)
Thickness: 60 mm
The new facade element LUNOtherm-S has been optimised for a significantly higher sound insulation and can be processed even more easily. The deflection of the air and thus of the sound by another 90° ...

Thickness: 72 mm
... also have additional sound insulation and rain and storm can stay outside. In addition, a complex sealing system ensures a controlled discharge of the humid exhaust air. As a result, warm moist air will not reach the ...

Isiklar Building Materials Inc.

Thermal conductivity: 0.035, 0.04 W/(m.K)
Thermal resistance: 0.62 W/(m.K) - 3.16 W/(m.K)
Thickness: 25 mm - 120 mm
... is an insulation material made of rock wool containing 97% natural fibers and obtained from basalt mineral molten into fibrous form at high temperatures. It is an optimal insulation material for buildings ...

Thermal conductivity: 0.038, 0.039, 0.048, 0.05 W/(m.K)
Thickness: 80 mm - 200 mm
... circumference Sound-absorbing and vapour-permeable UdiRECO wood-fibre insulation boards are offered as a system solution. Façade insulation Interior insulation Insulating ...


thermal insulationPPG ISOL PAE+
Thermal conductivity: 0.032 W/(m.K)
Thickness: 20 mm - 300 mm

Thermal conductivity: 0.032 W/(m.K)
Thermal resistance: 2.5 m²K/W - 6.25 m²K/W
Length: 2 m - 6 m
ISOVER SAINT-GOBAIN

Thermal conductivity: 0.1865 W/(m.K)
Length: 240 cm
Width: 120 cm
Construct steel frame buildings quickly and easily with this lightweight sheathing board. Glasroc X Sheathing Board is a faster and easier way to provide temporary weather protection to steel frames. Steel frame buildings need protection ...

Thermal conductivity: 0.042, 0.04, 0.038 W/(m.K)
Thickness: 30 mm - 200 mm
... DADdk, DZ; DIzk; WH; WIzk; WTR Insulation between rafters Insulation of compartments in walls in timber frame and timber panel construction Insulation of timber beam ceilings Insulation ...
Varie

Passive houses must be actively insulated and, at the same time, fulfil requirements for ecology, economy and living comfort. Just what you’d expect from an ecological building material. Just what you’d expect from MISAPOR. Thermal ...

Thickness: 12 mm
Forms a partition for blow-in insulation Applications Partitions connected cavities in the GUTEX Durio facade system

Thermal conductivity: 0.028, 0.025 W/(m.K)
Thermal resistance: 1.05 m²K/W - 6.4 m²K/W
Thickness: 30 mm - 160 mm
POLIISO® ED is a yellow thermal insulation panel made of rigid, closed-cell PIR foam, expanded between two saturated glass fiber supports. The panels declares λD values from 0.025 to ...

Continuous Insulation System Dri-Design has always held performance at the forefront of everything we do, resulting in one of the highest tested systems on the market. With the Dri-Design Continuous Insulation ...

Thermal conductivity: 0.038 W/(m.K)
Thickness: 40 mm - 140 mm
Application area: No compressive strength requirements. Insulation of: Façades Walls, interior insulation (behind brick lining or metal stud construction)
FOAMGLAS®

Thermal conductivity: 0.053 W/(m.K)
Length: 2,500 mm
Width: 1,200 mm

Length: 2,000 mm - 3,000 mm
Width: 1,200 mm
Thickness: 12.5, 15 mm
TPX is a cladding board used on exterior walls, whose central part is particularly reinforced against humidity with a special colored (orange) fiberglass mat. With usual dimensions to those of plasterboard systems intended ...

Length: 1,010 mm - 1,020 mm
Width: 400 mm - 410 mm
Thickness: 3 mm - 29 mm
... of the additional resin. Applications of 3D|CORE™ SHEETS in the architectural industry: - housings - panels - design elements - facades - roofs - coverings

Thickness: 4 mm - 25 mm
... is the first made in Turkey Magnesium Oxide construction and insulation Panel that is manufactured in Eskişehir, Turkey at international standards. The most significant feature of our panels ...

Thermal conductivity: 0.054 W/(m.K)
... relies on a patented mixture. Not only is it incombustible [A1] and noise cancelling, but also open to diffusion and properly insulating [thermal conductivity: 0,054 W/mK]. The density can be adjusted to the form of usage. ...

Thermal conductivity: 0.042 W/(m.K)
Thickness: 1 cm - 10 cm
... acoustic absorption, high humidity resistance. The SoKoVerd.LV cork panels are used, with dry laying or by means of PraKov adhesive, for thermal, hygrometric and acoustic insulation of: Pitch and ...
Coverd Srl
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining