Interior insulation

Thermal resistance: max 0.23 m²K/W
Thickness: 33 cm

... ideal for all acoustic renovation of existing environments, without any building works. APPLICATION FIELDS ▪ Acoustic insulation of dividing ceilings for housingunits

Thermal conductivity: 0.036 W/(m.K)
Thickness: 4 mm - 100 mm

... a good adhesive under-surface. The fibre fabric also absorbs tensile forces. All building board systems have great heat insulation properties, Area of application Area of application wedi building board standard The ...

Thickness: 12.5 mm - 50 mm

... rooms where there is a permanently raised level of humidity For walls, ceilings and floors Vapour barrier and thermal insulation Technical data Technical data of building board Vapor Dimensions 600 x 2500 ...

Thickness: 8, 17 mm

... compliance with increased sound insulation requirements. The extremely and permanently elastic material, consisting of a combination of rubber granulate/fibres with polyurethane binding agents, ensures optimum sound ...

Thermal conductivity: 0.036 W/(m.K)
Thermal resistance: 1.4 m²K/W - 8.45 m²K/W
Thickness: 5 cm - 30 cm

Thickness: 30 mm - 50 mm

... a flexible thermal insulation board. Product characteristics JACKOBOARD® Flexo: Made of extruded polystyrene foam Water-repellent With special coating on both sides Extremely small bending diameters with 30 mm thickness: ...

... our houses and generally in our lives. Trocellen keeps developing foam solutions to provide the best thermal and acoustic insulation to increase your comfort. The product Flexible, open cell polyester-based polyurethane ...

... weight lead layer Layer of open-cell (sound absorbing) PU foam, 12 mm thick Uses: Noise insulation for waste water piping in polyethylene or PVC. Sound insulation for walls

... our houses and generally in our lives. Trocellen keeps developing foam solutions to provide the best thermal and acoustic insulation. The Trocellen Aplomb product family consists of multi-layered products with one or ...

Thermal conductivity: 0.054 W/(m.K)

... permanent sealing facade joints. The Effisus Sealexpand XTRA Tapes ensure: Protection against rainwater Thermal insulation Acoustic insulation Works as a single seal element. No need of additional ...

... be rolled, cut etc.. PVC foam can be applied in different sectors: marine ( decks, bulkheads, interiors, hulls,etc..), public vehicles (floors, interiors, partition walls, roof panels, front ends), ...

... be rolled, cut etc.. PVC foam can be applied in different sectors: marine ( decks, bulkheads, interiors, hulls,etc..), public vehicles (floors, interiors, partition walls, roof panels, front ends), ...

... be rolled, cut etc.. PVC foam can be applied in different sectors: marine ( decks, bulkheads, interiors, hulls,etc..), public vehicles (floors, interiors, partition walls, roof panels, front ends), ...

Thermal conductivity: 0.032 W/(m.K)
Thermal resistance: 3.75, 4.5 m²K/W
Thickness: 145, 120 mm

Thermal conductivity: 0.035 W/(m.K)
Thermal resistance: 3.4, 4.25, 5.1, 5.7, 6.25 m²K/W
Thickness: 150, 180, 200, 220, 120 mm

Thermal resistance: 1.2, 2, 2.65, 3.2, 4 m²K/W
Thickness: 100, 120, 150, 45, 75 mm

Thermal resistance: 0.2 m²K/W - 0.75 m²K/W
Thickness: 15 cm - 50 cm

Thermal and acoustic insulation board, certified as eco-biocompatibile by ANAB-ICEA, consisting of Norway spruce wood wool bound with high strength Portland cement. The Norway spruce wood wool comes from certified sustainable ...

The insulation system for non ventilated metal roofs and walls Linea panels comes from 30 years experience of Brianza Plastica production of Isotec polyurethane roofing and wall-solutions. ISOTEC LINEA are polyurethane ...

Thickness: 25 mm - 100 mm

SilveRboard Rigid Foam Insulation is a high performance flat-sheet insulation material made from Expanded Polystyrene (EPS) which is coated with a layer reflective lamination on both sides. This highly ...

Thickness: 0.5 in - 6 in

... XS (SBGXS), a new higher performing rigid foam Insulation, is an expanded polystyrene (EPS) base material that embeds carbon “graphite” particles which increases the thermal performance of the EPS insulation. ...

Thickness: 25 mm - 100 mm

... high performance flat sheet rigid foam insulation made from Expanded Polystyrene (EPS). Envirosheet provides the best value and economy because it provides the highest r-value per dollar of all generic rigid insulation ...

ACOUSTIC VOID CLOSURES FOR TOPS OF WALLS KEY FEATURES Offering up to 44dB (Rw) Custom profiled to suit aperture / roof deck Can be used in conjunction with SIDERISE firestops SIDERISE acoustic void closures are a range of bespoke products ...

Thickness: 10 mm - 15 mm

Phonewell is a footstep soundproofing panel (impact and airborne sound). Its cardboard structure consists of crossed and glued layers filled with pure burnt quartz sand and a heavy loose mass. Only a mass of this kind, combined with lightweight ...

The B-Hygienic FRP sheet is a laminated glass fi ber reinforced polyester sheet, opaque, available with a smooth or embossed surface. The B-Hygienic FRP sheet is the basis for the products Insupanel, Renopanel, HygiCeil and HygiWall. Hygienic ...

The B-Hygienic FRP sheet is a laminated glass fi ber reinforced polyester sheet, opaque, available with a smooth or embossed surface glued to a polystyrene sheet. Also available without cold bridges. Hygienic protection for smooth or ...

Thermal conductivity: 0.044 W/(m.K)
Thickness: 150, 170 mm

ROCKWOOL Roll is made up of medium density mineral wool insulation. The thermal insulation boasts acoustic properties and is fire resistant, rated A1 Euroclass non-combustible. Manufactured at a width ...

Thermal resistance: 0.71 m²K/W
Thickness: 25.4 cm

CONROCK® is a board insulation that is designed specifically for application in a sandwich wall panel system where excellent thermal and fire resistance properties are required. CONROCK® can help achieve 1, 2 and 3 hour ...

... reduces embodied energy and delivers superior environmental sustainability. ECOSE® Technology was developed for mineral wool insulation, but offers the same potential benefits to other products where resin-substitution ...

Thermal conductivity: 0.024 W/(m.K)

High performance industrial insulation The Tarecpur range of CFC/HCFC-free rigid polyurethane (PUR) insulation is suitable for many types of use including: • Insulated panels and composites • Temperature ...

Thickness: 80 mm

Acoustic barriers which reduce noise transfer in ceiling and floor plenums Easy to install above or below modular partitions Excellent fire safety (Class A1) Stone wool tiles 80mm thick with aluminium foil membrane to both sides Recommended ...

Thickness: 20 mm - 100 mm

... foamed-in-place sealant for air leakage control and insulation of gaps, cracks, cavities and joints in the building envelope. It can be used for sealing ducts, elbows, valves, tees, and boxes, replacing or repairing insulation ...

Thickness: 40, 50, 60, 80, 100 mm

High-density, glass wool insulating panels for thermal insulation systems. ETA 10/0024 TECHNICAL DATA: Composition: high density glass wool. Colour: yellow. Thickness available mm: 40, 50, 60, 80 and ...

The THERMAX™ Brand Insulation is a polyisocyanurate rigid board insulation for interior and exterior continuous insulation. THERMAX products include an innovative core ...

Armaflex Ultima is a flexible elastomere insulation specifically designed for HVAC systems in residential and non-residential buildings. Its excellent Euroclass BL-s1,d0 rating ensures minimal smoke density in case of ...

... the comfort in adjacent rooms - add insulation to the basement. It’s easy & cost effective. For use in semi-finished or unfinished residential and commercial basement areas. DESCRIPTION Basement Blanket Insulation ...