-
{{>productsMenu}}
- Catalogs
-
{{>projectsMenu}}
-
{{>trendsMenu}}
- E-MAGAZINE
- Building & Construction >
- Insulation and sealing >
- High-performance insulation
High-performance insulation
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

Thermal conductivity: 0.34 W/(m.K)
Thickness: 50 mm - 160 mm
... effective insulation to keep the weather out and importantly, the heat in. The ROCKWOOL High Performance Partial Fill Cavity Slab has been developed to provide effective thermal insulation ...
ROCKWOOL

... sustainability of buildings in which they are incorporated High insulation efficiency for maximum thermal comfort Non-combustibility for enhanced safety Superb acoustic performance Highly ...

Basotect® is a flexible, open cell foam made from melamine resin, a thermoset polymer. Its characteristic feature is its three-dimensional network structure consisting of slender and thus easily shaped webs.

Thermal conductivity: 0.04 W/(m.K)
Thickness: 20 mm
THE ADVANCED PLUG & PLAY PRE-INSULATED PIPE SYSTEM FOR HIGH-TEMPERATURE EVACUATED TUBE SOLAR COLLECTORS Special Features Excellent performance in high-temperature applications Integrated ...
Armacell

Thermal resistance: 0.5, 0.2 m²K/W
Thickness: 65 mm - 160 mm
... concealed wall cavities, having been tested and assessed for up to 60 minutes’ integrity and insulation, exceeding the minimum requirements. These cavity wall insulation products have been created ...
ROCKWOOL

Thermal conductivity: 0.039 W/(m.K)
... non-combustible roofing insulation board. The boards are compatible with a range of flat roof systems, including single-ply, EPDM and liquid membranes, bitumen, and green roofs. HARDROCK Multi-Fix (DD) boasts an extremely ...
ROXUL

... is the new high-performance PU insulation foam from BASF for the refrigeration industry. This pentane-blown system offers maximum productivity combined with low material consumption and ...

ISOVER SAINT-GOBAIN

Thermal resistance: min 10.0 W/(m.K)
ISOVER SAINT-GOBAIN

ISOVER SAINT-GOBAIN

Thermal conductivity: 0.055 W/(m.K)
Thickness: 50 mm
Silentetto TXT is a high-performance soundproofing panel designed to reduce the passage of noise in roofs with a wooden structure. Thanks to its composition consisting of materials of different density ...

Thickness: 12.5 mm - 50 mm
„The special building board for rooms with high humidity.“ Product information wedi building board Vapor is a composite element made from extruded polystyrene rigid foam which is reinforced on both ...

... our houses and generally in our lives. Trocellen keeps developing foam solutions to provide the best thermal and acoustic insulation to increase your comfort. The product Flexible, open cell polyester-based polyurethane ...
Trocellen Italia

... weight lead layer Layer of open-cell (sound absorbing) PU foam, 12 mm thick Uses: Noise insulation for waste water piping in polyethylene or PVC. Sound insulation for walls
Trocellen Italia

... weight lead layer, laminated on both sides with: 3 mm thick layer of anti-vibration PE foam coated with black embossed film Uses: Impact and airborne noise insulation. Aplomb 22 should be used to ...
Trocellen Italia

Thermal conductivity: 0.027, 0.025 W/(m.K)
Thickness: 15 mm - 80 mm
... significantly reduced thermal conductivity. This means that thermal insulation is improved by up to 27 % in comparison to previous JACKODUR® CFR products. The result is thinner insulation material thicknesses ...

Thermal conductivity: 0.025, 0.027 W/(m.K)
Thickness: 15 mm - 80 mm
... significantly reduced thermal conductivity. This means that thermal insulation is improved by up to 27 % in comparison to previous JACKODUR® CFR products. The result is thinner insulation material thicknesses ...

Thermal conductivity: 0.046 W/(m.K)
Thermal resistance: 2.6, 1.3, 1.7, 2.15 m²K/W
Thickness: 60, 80, 100, 120 mm
Rigid insulation board for external applications (roofs and walls) 3-fold function: Insulation, wind-proof layer, secondary weather protection layer Excellent insulation against cold ...
STEICO

Thermal conductivity: 0.04 W/(m.K)
Thermal resistance: 0.5 m²K/W - 6.25 m²K/W
Thickness: 20 mm - 250 mm
... wall with insulation, Metal stud over masonry wall with insulation, Double Wall with insulation fully filling the cavity, Internal partitions with insulation lined on ...
Amorim Isolamentos SA

Thermal conductivity: 0.036, 0.034, 0.033 W/(m.K)
Thickness: 3 cm - 12 cm
... closely laid strips of sintered expanded polystyrene. The system offers excellent thermal insulation performance.
Polyglass Spa

Thickness: 15 mm - 75 mm
... acoustic insulation board, consisting of mineralized fir wood wool bound with Portland cement. It complies with EN 13168 standard. High thermal insulation, high thermal ...

Thickness: 50 mm - 175 mm
... thermal insulation, high thermal inertia performance in summer conditions, high sound insulation performance and water vapor permeability. ...

Thermal conductivity: 0.075 W/(m.K)
Thermal resistance: 0.1 m²K/W
Thickness: 8 mm
Largely rot-, moisture-, age- and deformation-resistant, permanently elastic. MaterialPU-bonded rubber fibres Standard delivery formin rolls of 14.95 m² each, 13,000 x 1,150 x 8 mm Temperature resistancefrom -20 °C to +80 °C Colouranthracite Physical ...
REGUPOL BSW GmbH

Thermal conductivity: 0.08 W/(m.K)
Thermal resistance: 0.22 m²K/W
Thickness: 17 mm
Largely rot-, moisture-, age- and deformation-resistant, permanently elastic MaterialPU-bonded rubber fibres Standard delivery form1,200 x 1,000 x 17 mm, 60 m² per pallet Temperature resistancefrom -20 °C to +80 °C ColourAnthracite, ...
REGUPOL BSW GmbH

Thermal conductivity: 0.063 W/(m.K)
Thermal resistance: 0.29 m²K/W
Thickness: 17 mm
Largely age-resistant, permanentley elastic. The material must be carefully and permanently protected against moisture during transport, storage, processing and use. Wet material may not be used. MaterialPU-bonded elastomers Standard ...
REGUPOL BSW GmbH

Thermal resistance: 1.27 m²K/W
Thickness: 72 mm
The Phonotech® DK40 element is based on the floating roof principle through its spring batten providing a mass-spring-mass effect. Due to its RD40 start and end battens, the Phonotech DK40 system forms an intuitive complete roofing assembly. ...
Phonotech sprl

Thermal resistance: 1.84 m²K/W
Thickness: 82 mm
The Phonotech® DK60 element is based on the floating roof principle through its spring batten providing a mass-spring-mass effect. Due to its RD60 start and end battens, the Phonotech DK60 system forms an intuitive complete roofing assembly. ...
Phonotech sprl

Thermal resistance: 2.41 m²K/W
Thickness: 102 mm
The Phonotech® DK80 element is based on the floating roof principle through its spring batten providing a mass-spring-mass effect. Due to its RD80 start and end battens, the Phonotech DK80 system forms an intuitive complete roofing assembly. ...
Phonotech sprl

Thickness: 4 mm
... REFLEX® reflective sheet is perfect for the insulation of Roofs and Ducts, due to its lightness, manageability and easy application, creating the necessary comfort during its construction. SPACE REFLEX® insulation ...

Thermal conductivity: 0.038 W/(m.K)
Thickness: 8 mm
... REFLEX® reflective sheet is perfect for the insulation of Roofs and Ducts, due to its lightness, manageability and easy application, creating the necessary comfort during its construction. SPACE REFLEX® insulation ...

Thermal conductivity: 0.046 W/(m.K)
Thickness: 16 mm
... ® reflective sheet is perfect for the insulation of walls, Roofs and Ducts, due to its lighness, manageability and easy application, creating the necessary comfort during its construction. SPACE REFLEX® insulation ...

Thermal conductivity: 0.037 W/(m.K)
Thickness: 40 mm - 240 mm
Flexible woodfibre insulation board Between-stud insulation in timber frame, post and beam interior and exterior wall structures Between-rafter insulation Ceiling insulation Partitions/ ...

... construction and between walls and ceilings, for fixing and insulating window and doorframes, loose tiles, boards, etc. • One component polyurethane based foam • For heat and sound-proofing insulation COLOURS Available ...

Insulating polyurethane gun foam Insulating polyurethane foam with safety propellant. Exhibits very good adhesion to a variety of materials such as metal, wood, stone, concrete and many synthetic materials ...



Thickness: 31 mm
... stop Due to the impressive 46dB Rw performance at only 31mm thickness, the SIDERISE FIP high-performance acoustic panel can also be used in many other conditions that demand the combination ...
Siderise Group

Combining a high surface mass with ‘limp’ mechanical characteristics, SIDERISE BM/P series acoustic barrier mat offers optimum sound reduction and dampening performance. Primarily designed to improve ...
Siderise Group

ACOUSTIC BARRIER MAT KEY FEATURES High acoustic performance Thin and flexible Reduces ‘coincidence dip’ Low cost unsupported option Inherent fire resistance Low odour An acoustic barrier designed to ...
Siderise Group

... Wool DESCRIPTION InsulSafe is an industry-leading fibre glass blowing insulation used in residential and commercial construction as a thermal and acoustical insulation. It is unbonded, white, virgin ...
Certain Teed

Thermal conductivity: 0.032 W/(m.K)
Thickness: 100 mm - 200 mm
The new standard for inverted roof insulation λ0.032 W/mK Up to 11% improved insulation performance.* Potential for significant thickness savings. Offered in single extruded thicknesses ...
Dow France
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please specify:
Help us improve:
remaining