Entry door FHE

metalglasssliding

Overview

• Automatic or manual single- and double-leaf sliding doors designed for environments requiring bacterial contamination control and airtight or hermetic sealing.
• Suitable for installation on prefabricated systems and standard walls. Available in two main configurations: airtight and hermetically sealed.

Versions

• Airtight version (FHE-SSA / FHE-SSM): vertical seals engage with frame profiles while upper and lower seals slide along the horizontal profile and floor surface to ensure airtight closure.
• Hermetically sealed version (FHE-SHA / FHE-SHM): the leaf performs a combined sliding, vertical and inward movement during final closing to compress perimeter seals and achieve a full hermetic seal (up to 20 mm vertical stroke and approx. 45° inclination on final close), enabled by the support and trolley guide design without additional actuators.

Operation

• Available for automatic operation using electromechanical drives with control, regulation and monitoring systems appropriate to the application.
• Also available for manual operation with handles.
• Automatic configurations can integrate safety and monitoring devices in compliance with applicable regulations.

A1400 AIR Sliding Door Operator

• Power supply voltage 220–240 V~ 50/60 Hz
• Max power 140 W
• Standby power 3 W
• Use frequency 100% (continuous)
• Max leaf width 65 mm
• Electric motor 36 V motor with encoder
• Max accessories load 1 A — 24 V
• Type of traction toothed belt
• Opening/closing speed 10–60 cm/s (single leaf); 20–120 cm/s (two leaves)
• Partial opening adjustment 5%–95% of total opening
• Pause time 0–30 s or Energy Saving function
• Night pause time 0–240 s
• Encoder supplied as standard
• Protection sensor monitoring (EN16005) standard (may be excluded)
• Low energy movement (EN16005) standard (may be excluded)
• Operating ambient temperature −20°C to +55°C
• Protection class IP23 (internal use)
• Regulatory compliance EN 16005; EN 13489-1; EN 13489-2; EN 60335-1; EN 60335-2; EN ISO 12100; EN 61000-6-2; EN 61000-6-3

Models / Item codes

• FHE-SSA — Airtight automatic sliding door — 105141
• FHE-SSM — Airtight manual sliding door — 105142
• FHE-SHA — Hermetic automatic sliding door — 105143
• FHE-SHM — Hermetic manual sliding door — 105144

Example installation / Gallery
Example installations illustrate typical mounting, integration with prefabricated walls and finished appearance in sterile or controlled environments.

Technical specifications

• Series: FHE (models FHE-SSA, FHE-SSM, FHE-SHA, FHE-SHM)
• Two configurations: airtight and hermetically sealed (hermetic final close with up to 20 mm vertical stroke)
• Drive: automatic (A1400 AIR operator with 36 V motor and encoder, toothed belt traction) or manual
• A1400 AIR electrical data: 220–240 V~ 50/60 Hz; max 140 W; standby 3 W; continuous duty
• Opening/closing speed: 10–60 cm/s (single leaf), 20–120 cm/s (two leaves); partial opening 5%–95%
• Accessories load: 1 A — 24 V; encoder included; IP23 (indoor)
• Operating temperature: −20°C to +55°C
• Conforms to applicable EN standards including EN 16005 and relevant EN 13489 and EN 60335 series