Bitumen glue Activator

exteriorliquid

Ready-to-use adhesive, that is used as a primer in order to improve the adhesion of self-adhesive roof membranes. IKO pro Activator can also be used as a contact adhesive for bitumen roof felt with a lower surface protected by a macro-perforated thermofusible film. Improves the adhesion to the substrate of both self-adhesive roof membranes and of bitumen roof felt with a lower surface protected by a macro-perforated thermofusible film. 12 months in the hermetically sealed packaging, when stored in a dry and cool place. Partly used containers may be resealed and used again after correct storage. To avoid the risk of spillage, always store and transport in a secure upright position. The air temperature and the product temperature should be between 5°C and 25°C. The substrate needs to be sound, clean and free from grease and nonadhering particles. Stir firmly before application, don’t dilute. Apply a thin film with an adapted spray system based on air-pressure with a minimum pressure of 4 to 5 bar or with a spray gun with adjustable spray field and adjustable airflow rate. Alternatively, use a paintbrush or roller for small surfaces and details. Allow the solvents to evaporate from the IKOpro Activator layer for 5 to 10 minutes (at 10°C). Apply the membrane to the prepared substrate and press down firmly.