DescriptionThese OCAPE® pedestals are adjustable supports designed to carry paving slabs on roofs and terraces. They enable levelling and alignment of mineral slabs or wooden grating while protecting the waterproofing.
Key informationAdjustable supports made of 100% recycled polypropylene. Available heights: 20–30 mm, 40–60 mm, 50–80 mm, 80–140 mm, 140–230 mm. Primarily intended for slab terraces, mixed terraces, pedestrian areas, green roofs and gardens, levelling and terrace pedestals.
Features and benefits- 4 breakable 3 mm spacers to obtain a flush surface.
- Reinforcements for increased compressive strength.
- Multi-perforations to eliminate water retention.
- Chamfered flange edge to avoid damaging the waterproofing membrane.
- Manual, millimetre adjustment via the nut: no additional tools required.
- Quick and easy installation; flange shape optimised for placing against a wall or in a corner.
Certifications & warranty- Compliant with DTU.
- 10-year warranty.
- ISO 14001 and ISO 9001.
- Made in France.
- Recycled material.
Installation & applicationPlace the pedestals directly on the waterproofing according to the laying plan. Lay mineral slabs or wooden grating against the spacers. It is recommended to position a slab support plate on pedestals located at the perimeter or against the upstand to stabilise the covering. Turn the nut by hand to adjust the pedestal height to the desired level. Check the level progressively during installation and adjust as needed.
Pro tips- Offset laying: remove the spacers you do not need.
- Use a laser to verify the reference point.
Technical characteristics / specifications- Material: Polypropylene 100% recycled
- Colour: Black
- Available heights: 20–230 mm (variants 20–30 / 40–60 / 50–80 / 80–140 / 140–230 mm)
- Spacers: Height 9 mm / Thickness 3 mm / Quantity 4
- Flange diameter: 208 mm
- Ground support area: >300 cm²
- Head diameter of pedestal: 120 mm
- Support area: >100 cm²