Bulletproof door EX5 FB4

interiorsheet steelgalvanized steel

Dedicated counter frame, in galvanised sheet steel (UNI EN 10142) 20/10 thick, reinforced on 3 sides with 50/10 steel plate. Galvanised sheet steel frame (UNI EN 10142) pre-filmed on both sides in RAL 7043-like colour, having a total thickness of 20/10 and reinforced with a solid square iron, on the three rebate sides. Structure consisting of a galvanised pressure bent 15/10-thick steel sheet. Manganese steel sheet, 20/10 thick, fully covering the exterior of the door Galvanised sheet metal perimeter leaf profile pre-filmed on the exterior, dedicated sealing strip inserted in the dedicated seat. 3 (two) hinges, adjustable in height and width, made of ø 22 mm drawn steel with ø 10 mm cemented steel pin rotating on a ball equipped with hinge cover caps the same colour as the frame. 30/10 thick lock reinforcement plate. Cylinder lock with ø 18 mm central bolts protruding by 30 mm plus latch bolt, which greatly reduces noise and effort in key actuation compared to traditional locks. Omega reinforcement in 15/10 thick galvanised pressure bent sheet metal, insulated internally via the introduction of special soundproofing materials. Internal insulation via the introduction of soundproofing materials inserted within the vertical reinforcement structures and on the entire inner surface of the door. Internal covering, applied to the door via the introduction in the dedicated seat envisaged on the perimeter leaf profile Side bolt with ø 18 mm deadbolt, range of 30 mm. Bullet-proof threshold.