video corpo
cad

Beam hanger HUTF/HUSTF

beam hanger
beam hanger
beam hanger
beam hanger
beam hanger
beam hanger
beam hanger
Add to favorites
Compare this product
indicative price

Description

HUSTF has the double-shear nailing advantage — distributing the joist load through two points on each nail for greater strength. Finish Galvanized; see Corrosion Information Installation Use all specified fasteners; see General Notes Not acceptable for nailer or welded applications; see WP, HWP, HWPH and BA hangers HUTF — the minimum header or ledger size that can be used with this hanger is 3 1/2" HUSTF — with 3x carrying members, use 0.162 x 2 1/2" nails into the header and 0.162 x 3 1/2" nails into the joist Options See General Notes for Hanger Options. HUTF rough beam sizes are available by special order. HUSTF cannot be modified. Sloped and/or Skewed Seat HUTF can be skewed to a maximum of 45° or sloped to a maximum of 45°. HUTF can be skewed and sloped down only, provided W ≥ 2 3/8". No skew with slope up options available. For skews greater than 15°, uplift loads are 0.75 of the table loads. Hangers with a skew greater than 15° may have all the joist nailing on the outside angle. For sloped and skewed combinations, the allowable loads are 0.70 of the table loads. For sloped-down-only hangers, allowable load is 0.78 of the table load. Concealed Flange HUTF is available with one A flange concealed at 0.85 of the catalog table load. HUTF is available with both flanges concealed provided the W dimension is 2 9/16" or greater, at 0.85 of the table load. Specify HUCTF for both flanges concealed. No skew options available.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.