Industrial coating TIX A+B

flatfor wallfor concrete

Two-component epoxy compound suitable for creating continuous, high-thickness, chemical-resistant coatings, for the containment of industrial and cooling water. Description Formulated based on cross-linked epoxy resins with aliphatic and cycloaliphatic amine hardeners. The solid film, thanks to a high cross-linking density, has an excellent chemical resistance against various aggressive chemicals (acids, bases and solvents, in particular ethyl acetate). Use Continuous, thick, chemical-resistant coatings for the containment of industrial and cooling water. Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1,5 N/mm2. Preparation of the support Cls. new: the support must be finished with medium-fine trowel and seasoned; It must have a smooth, flat, dust-free and imperfection-free surface. No cement grout must emerge: in case it must be removed by means of appropriate cleaning systems. Cls. old: the damaged support (cavities, cracks, ...) must be restored and restored in order to rebuild suitable flatness and degree of finish. The support must be free from traces of oil, greases and residues of previous treatments. Metal supports: sandblast to white metal (SSPC-SP5, Svensk Sa3) before applying PAVIPLAST VAASCHE TIX; in case you wish to carry out a treatment anticorrosive steel or when the same (after sandblasting) can not be immediately coated with the PAVIPLAST VASCHE TIX, you must perform a sandblasting to the almost white metal (SSPC-SP10, Svensk Sa2 1/2) and then apply a layer of anticorrosive primer with a brush.