Hardener admixture LATEX K5

for floorfor exterior and interior wallsfor interior walls

Water-based acrylic latex for cementitious compounds and plasters. Descritpion One-component waterborne acrylic resin, to be used as a modifier for cement-based mortars. Confers: excellent adhesion to the support increased flexural and impact resistance resistance to cracking greater impermeability without varying the diffusion of steam resistance in industrial environments Use Plastic plasters. Cement levels. Castable mortars for floors. Promoter of adhesion. Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1,5 N/mm2. Preparation of the support Concrete bottoms must be solid, leveled, absorbent, not polluted by oils, dust or other substances. Check the most convenient type of mechanical preparation. Remove damaged and detachment parts. Any outcropping irons must be brushed and insulated with a special anti-corrosion primer. Oily surfaces must be grinder by removing about 1 cm surface and treated with FLUIDEPOX, cross-linked with 40% epoxy quick hardener. Before laying the mortar, moisten the substrate abundantly. Then proceed with the coating, taking care to eliminate any stagnant water.