Wood adhesive paste PU700

for stone

PU700 is a rapid curing polyurethane foam adhesive which can be applied by gun or straw. PU700 is a high-strength adhesive in an innovative delivery system which allows for more accurate application and prevents premature curing. Suitable for bonding a wide variety of materials. An innovative solution for bonding bricks / blocks that can replace traditional mortar High performance wood and joinery adhesive Ideal for bonding a wide range of construction materials including steel and foam Rapid curing – joint can be handled / manoeuvered within 10 minutes, and cures fully within 24 hours Easy to use: no mixing, no water, no dust, no specialist tools or equipment required Suitable for indoor or outdoor use Excellent long-term resistance to seawater, limewater, dilute acids and caustic solutions IMPORTANT: At least one surface should be porous. Always carry out a test to confirm compatibility prior to use. Protect floor coverings with paper or a plastic film. The surfaces must be dry, solid, stable and capable of carrying the load of the panels to be installed. Remove all loose particles, dust and grease. A speedier cure can be attained by moistening the substrates if needed. Shake the canister vigorously at least 20 times. Remove the protective cap and screw onto the illbruck PU foam gun or straw. Apply a bead of PU700 along the horizontal and vertical sections to be bonded. Keep the end of the nozzle just off the surface. For best results always work with the canister in a vertical position and keep the valve pointed downwards.