Cover decorative panel FIBRALUX MR BLACK

furniturewallfor interior

NEW: A black core coloured MDF panel with a 'Satin' finishing at both sides, creating a subtle silk gloss effect. MDF CE norm: MDF.HLS Moisture resistant Humid conditions - service class 2 Black Formaldehyde class: Low Density: High High-density MDF board, coloured black in the mass, with a transparent “silk gloss” finishing on both sides. The small wood fibres remain visible on the panel’s surface, emphasizing the natural origin of the product. Fibralux MR Black Satin can be used for load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI). Fibralux MR Black Satin is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux MR Black Satin is an original Spanolux product. Applications - Interior and furniture Available fire reaction classes - D-s2-d0 The board can be applied in service class 2 (restrictions in temperature and ambient humidity) and can be used in biological hazard classes 1 and 2 of EN 335-3. During and especially after installation the boards must, wherever possible, be optimally protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided. The board will expand/shrink under variable humidity conditions, albeit to a lesser extent than standard MDF, meaning that an expansion space must be provided for at all times.