NEW: A black core coloured MDF panel with a High Gloss finishing at both sides, creating a surprising mirror effect.
MDF
CE norm: MDF.HLS
Moisture resistant
Humid conditions - service class 2
Black
Formaldehyde class: Low
Density: High
High-density MDF board, coloured black in the mass, with a transparent “high gloss” finishing on both sides. The small wood fibres remain visible on the panel’s surface, emphasizing the natural origin of the product. Fibralux MR Black High Gloss can be used for load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI). Fibralux MR Black High Gloss is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux MR Black High Gloss is an original Spanolux product.
Applications -
Interior and furniture
Available fire reaction classes -
D-s2-d0
The board can be applied in service class 2 (restrictions in temperature and ambient humidity) and can be used in biological hazard classes 1 and 2 of EN 335-3.
During and especially after installation the boards must, wherever possible, be optimally protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided. The board will expand/shrink under variable humidity conditions, albeit to a lesser extent than standard MDF, meaning that an expansion space must be provided for at all times.