|
|
| Square body with pronounced edges. Contains a single fluorescent lamp that is always switched on. |
|
| Decorative block consisting of a large box made of ABS, with four directional spotlights on the top with rectangular PAR 36 pressed glass lamps, joined to the housing with chrome signs. Consists of 2 or 4 PL fluorescent lamps that switch on if the network power supply fails. An internal microprocessor checks the status of the device and periodically performs tests of functionality and autonomy and informs of the status. If the luminaire connects to a TMA module, data on its status is sent directly to a control computer via this module where the status of the entire emergency luminaire installation can be monitored. The connection system is direct and has a front panel with two optical devices that indicate the status of the light. |
|
Square body with raised edges that consist of an aluminium housing and a polycarbonate diffuser. Viewing distance according to EN 1838 < 46 m.
Consists of a fluorescent tube that is switched on if the mains power fails, in the case of series Orto non maintened, it is also possible to have the Orto combined wich contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal light that can be switched on and off at will while voltage is supplied, and in the case of the Orto combined TCA incorpored an internal microprocessor checks the status of the device and periodically performs functionality and autonomy tests and reports the status. |
|
| Square body whose front parts form a slightly curved plate which can be adjusted either horizontally or vertically. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal light that can be switched on and off at will while voltage is supplied. |
|
| Circular body with rounded edges. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal light that can be switched on and off at will while voltage is supplied. |
|
| Rectangular body with raised edges that consist of an aluminium housing and a polycarbonate diffuser. With a mounting system for connection to a rail. Consists of a fluorescent tube that is switched on if the mains power fails |
|
LED Kit "Emergency Exit" Type AT783
The LED-installation kit AT783 was specially designed and developed for remodelling and fitting of existing emergency exit lighting systems with traditional illuminants. Time and effort spent on maintenance and the high costs involved therein are now a thing of the past.
Groundbreaking
Our LED-installation kit is virtually maintenance-free. Under ideal operation the durability of a LED lasts up to 100.000 hours. That´s more than 11 years of continuous operation! Existing emergency exit lighting systems could easily be retooled into our newest energy saving LED-technology without major technical or financial investment.
Easy to handle
The installation kit consists of 10 light diodes with an output of 10 Watts altogether. |
|
| Rectangular body whose visible side is a slanted surface with rounded edges. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Consists of a fluorescent lamp that switches on if the network power supply fails. An internal microprocessor checks the status of the device and periodically performs tests of functionality and autonomy and informs of the status by means of LED pilots. The tests can be triggered manually by means of an ON Remote Control order via the network. |
|
Housing: Vandal-resistant, self-extinguishing, UV-stabilized, anti-yellowing grey polycarbonate, .
Diffuser: Vandal resistant, V2 self-extinguishing, UV-stabilised clear polycarbonate.
Equipment: with bracket
Regulations: Manufactured in compliance with EN60598 - CEI 34 -21 standards. The level of protection complies with the EN60529 standard.
S.A. Emergency (Maintained): In the event of a black-out the one lamp connected to the back-up circuit stays on, thus avoiding the inconvenience caused by a sudden absence of all light.
Emergency run time: 180 minutes. When power is restored, the battery recharges automatically in 24 hours. |
|
| Aluminium and borosilicate glass housings made in accordance with European directives 2004/108/CE and 94/9/CE governing electromagnetic and explosive atmosphere compatibility. Classification: II2G EEX d IIC T6 - II2D IP 67 T85ºC. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal light that can be switched on and off at will while voltage is supplied. |
|
HS series – 20W
This safe, low voltage 20W spot light is designed for direct connection. While all spot lights are low voltage, an integrated transformer can be provided by special request
on certain models. A remote transformer is also available. The HS Spot Light is ideal for
production, inspection, medical and research applications.
Features include:
12V or 24V with 20W halogen bulb
Direct or rectangular mount base
Rocker switch on base
|
|
HM series – 35W
This safe, low voltage 35W spot light is designed for direct connection. While all spot lights are low voltage, an integrated transformer can be provided by special request on certain models. A remote transformer is also available. The HM Spot Light is just right for medical, research and inspection applications.
Features include:
12V or 24V with 35W halogen bulb
Direct or rectangular mount base
Rocker switch on base
|
|
TBS324/326 - a functional cleanroom luminaire
The TBS324/326 is an IP65 luminaire range which can be applied in hospital and industrial environments where protected luminaries are required.
TBS324 and TBS326 luminaires are available in multiple IP ratings to fit the different ISO classifications of cleanrooms. Both in modular and nonmodular versions and with a wide choice of lamps and a large selection of accessories, it is a highly flexible luminaire range.
The TBS324/326 are available in 2- and 4-lamp versions with both glass and opal covers. |
|
PURELINE
Beneficial linear lighting and medical supply unit for excellent examination results: homely, efficient and easy to clean.
|
|
Solid and efficient, it is a quick and easy to use working tool
Elliptic or tubular balloons.
Self-inflating with air thanks to a built-in fan.
Several sizes available.
Halogen or HMI light.
You can find it in low voltage, portable in big power for huge areas versions.
Balloon designed to be solid.
Withstand winds up to 100km/h- 65mph.
Light and easy to transport.
Easy to set and to use.
Mounted on a stand or on a vehicle.
Ideal for the operations by night: outdoors or in dark areas, but also for activities in confined spaces and even below the ground.
To light any industrial and working sites, any rescue and security operation, but also to light large event s like sporting events or festivals, or to light parking lots, entrances, pathways etc... |
|
Compact floodlight for 1 kW or 2 kW double-ended metal halide lamps.
The floodlight body consists of two parts made of painted die cast aluminium alloy.
The clear tubular lamp is located in the cover and is accessible without tools.
The Zenith is particularly suitable for lighting large areas where optimal colour provision is an essential parameter: sports fields, halls, etc.
Coating: polyester powder
Colour: AKZO grey 900 sand-blasted |
|
Optivision MVP507
The first asymmetric luminaire for downlighting that combines compactness with very high efficiency. It provides excellent spill-light control and limitation of glare and upward leakage of light. Accommodates metal-halide lamps for good colour rendering or a high-pressure sodium lamps for economical operation. Available with narrow-, medium- and wide beams. |
|
Personalized customization
Depending on what you want, depending on the themes, the place and the area, you can put your logo, message or pictures on the balloons: this can be done without distortion thanks to the technical know how of Airstar.
You will have the choice between vinyl, digital printing, painting, embroidery, LEDs or colored cover. |
|
| ... products without information |
| |
|
|
Various professional lighting
