|
|
| Exterior projector with die-cast aluminium body in two sizes: 280 and 360mm diameter that include cooling grill; with flat glass protective diffuser, resistant to thermal shocks and bangs; specially varnished for placing outside; Includes protection IP-65 with silicone rubber and compression gland; Stainless steel screws; Steel brackets, radial plate shape, with goniometric scale; conic reflectors made from high purity aluminium designed to obtain symmetric rotation light, ideal for illuminating details on buildings, gardens, residential areas, etc. or for illuminating publicity surfaces; can be mounted on surfaces with radial plates or on Columns. Includes as accessories anti-glare grills and anti-glare screen. |
|
GEMINI PROJECTOR 7 LED
HBLED Projector on Bracket for technical lighting IP67
Aluminium body covered by epoxy grey paint, high transparency glass and high resistance (IK10), silicon sealing gasket for high temperatures, stainless steel tightening screws.
Alternative finishing available on demand (aluminium, 316L Stainless steel, special painting any colour on demand.
RGB VERSION
Supplied with a 6x0.22mm² cable 3mt long and equipped of special connector to interface the other components of RGB piloting system.
MONOCHROME VERSION
Supplied with a 2x0.75mm² cable 3mt long
All the products of this range need an external power supply available in our accessories range. |
|
Uppy design Silvio De Ponte
Outdoor floodlight for halogen, discharge and high pressure sodium lamps. In die-cast and extruded aluminium and tempered glass. Finishing resistant to atmospheric phenomena. Adjustable up to 180° on the horizontal plane. Vandal-proof version available for public places. Protection degree IP65 and IP66/IP67.
Wiring
- Remote wiring (maximum distance 10 mt.) and built-in wiring.
- Low-leaking watertight supply unit with thermic protection
Construction features
- Floodlight: extruded and die-cast aluminium body; tempered transparent glass
- Supports and screw: made of galvanized steel
- In vandal-proof versions the wire is protected by a spiral, grey-coloured PVC-sheathed galvanized metal tube (FE/ZN3), equipped with a stainless-steel wire fastener
Colours
- Silver grey
- Anthracite grey
|
|
Waterproof floodlight (IP 66) for lamps up to 150 W offering a wide choice of light distributions (peak intensities from 300 to 32,000 cd/klm).
It consists of a painted die cast aluminium alloy enclosure and cover.
The enclosure contains the removable control gear plate and lampholder support.
The optical compartment consists of partially screenprinted tempered glass, sealed onto the enclosure and a reflector made of deep drawn, polished and anodised aluminium (3 reflectors available).
A painted die cast aluminium bracket facilitates the mounting of the floodlight and the adjustment of its position.
Coating: polyester powder
Colour: AKZO grey 900 sand-blasted |
|
| LUMINAIRE: It consists of a base part where the light fitting is installed, with a rubber profile to make it watertight, and a cover screen to protect the assembly. It is made out of L-2560 cast aluminium, weighing 15.5 Kg. With 4 mm thick armoured glass. LYRE: Made in L-2520 cast aluminium. NUTS AND BOLTS: In stainless steel |
|
Housing/frame: In die-cast aluminium with cooling fins.
Reflector: Asymmetric, in anodized polished and hammered 99.85 aluminium, 2µ thick.
Diffuser: Tempered glass, 5 mm thick, thermal shock and impact resistant (UNI 7142 tests - British Standard 3193).
Painting: With polyester powder, black, upon chromate treatment, resistant to corrosive and saline environments.
Lampholder: In ceramics, with silver-plated contacts.
Electric gear: 230V/50Hz supply with thermal protection. Silicone wire terminated with admiralty brass clamps; fibreglass braid insulation - cross-section: 1 sqmm (up to 400W) or 2.5 sqmm (400 to 1000W). 2P+T terminal block (maximum allowed lead cross-section: 4 sqmm).
Equipment: Gasket in silicone rubber. Cable gland in f.g. nylon, Ø 1/2 gas thread. Retained steel screws with special anticorrosion and anti-gripping treatment. Bracket in steel with protractor scale. The hinge-opening front frame stays hooked to the fixture housing.
Regulations: Produced according to applicable EN60598-1 CEI 34 - 21 standards, IP65IK08 degree of protection according to EN 60529 standards. They have obtained the ENEC European certification of conformity.
Wind surface: 2400 sqcm. |
|
Small Quartz Flood (SQF)
Quartz / 150 watts
Applications:
Ideal for lighting building facades, signs, sports fields, or general floodlighting applications.
Features:
- Die cast aluminum construction
- 1/2" threaded adjustable knuckle / Hinged Frame
- Lamp Included /Standard bronze finish |
|
| Luminy 1 and 2 - Small outdoor accentuation LED Proyectors - 1W or 3W, all LED colours disponible, great choice of collimators for various light beams opening, easy to install. |
|
Outdoor fixture with rigorous lines, available with various electrifications. Its personality, characterised by a very unusual handle for adjusting the lamp body, makes it ideal for different applications. To light facades or large areas this fixture is a formally simple but determined solution.
Light Sources:
Light Source Halogen (QT-32 Trasparente) with socket E27 (150W).
Light Source Metal halide (MH HCI) with socket G12 (150-35-70W).
Emissions:Direct
Power supply:
Electromagnetic control gears for all metal halide versions. Directly via mains voltage for the halogen version.
Body:
Extruded aluminium with a glazed grey finish, enhanced by a practical plastic handle used to adjust the beam. Fixed on an adjustable bracket, it can be mounted on the wall, ceiling or floor. Die-cast closing bezel with tempered glass screens. Anti-oxidant electroplated with a polyester powder finish.
Colours:
Grey for outdoors. |
|
PROflood DCP608
PROflood, the IP65 waterproof gobo and shutter projector is a powerful tool that gives display lighting designers great creative freedom.
Features, materials and finish
Materials
High pressure die-cast aluminium housing and cannon Philips dark grey (10714) paint
Stainless-steel brackets and supports for gobo and glass filters
Glass
Hard-wearing, non-reflecting and transparent
Reflector
Ellipsoidal and specular reflector in high quality anodised aluminium
Optics
Four non-reflecting lenses, with a beam angle adjustment of 2 x 10° to 2 x 20° (Zoom spot)
Image size (Ø); adjustable by moving the lens along the optical axis
Image focus; adjustable by moving the two lenses along the optical axis
Image uniformity; adjustable by moving the diaphragm (Ø 50 mm) along the optical axis
Support gobo or shutters
Integrated electronic ballast, PrimaVision HID PV/150 220 - 240 V AC, 50/60 Hz. This increases the lifespan of the CDM by up to 30%, through faster elimination of the effects of mains voltage variation and by controlling the lamp ignition
M20 cable gland
|
|
LEDflood BCP730
Philips’ LEDflood – a new flood light concept for illuminating and enhancing structures with coloured light - expands the creative palette. The new LEDflood for front and accent lighting integrates state-ofthe-art-technologies, such as high-power LEDs and a lighting control system. Its high visual quality, combined with its innovative and longlife light source and high-efficiency collimating optics, provides a new and advanced lighting solution for outdoor flood lighting applications.
LEDFlood RGB/AWB extension range is compatible with DMX and enables dynamic color changes.
LEDFlood AWB deliver the full palette of natural white light, revealing the beauty of the architectural materials used. |
|
OUTMAX
Projector OUTMAX, for 1 x high-pressure sodium vapour lamp 50W with lampholder GX12-1, horizontal rotation 360°, composed of one housing, in cast aluminium, rectangular, jet black (RAL 9005), with reflector, in pure aluminium, silver anodised, narrow flood (S1), with protective glass, clear, vertical adjustment 30°/180°/30°, protection class I, protection degree IP65, with electronic control gear, with fixing rose |
|
| PYROS: professional projector for discharge lamps up to 250W. Maximum horizontal and vertical adjustability with diecast aluminium joints. Aiming stability and precision guaranteed by the graduated ring and mechanical position locking system. Quick IP67 electrical connection system hidden inside the fixture arm with through-wiring using 2 PG11 cord grips. Relamping is possible without the use of tools thanks to the 3 rapid knobs positioned at 120° on the fixture body. Relamping can be carried out without having to remove any of the accessories mounted. |
|
- Available with LED, halogen (PAR16, PAR20), and compact fluorescent (PAR20) lamps. Lamp info: LED, PAR16H, PAR20H, PAR20 CFL.
- Precision machined from aluminum or brass with all stainless steel hardware.
- Removable cap available in four cutoff styles.
- Each cap holds up to three accessories.
- Thick walled cap and optimized high temperature silicon O-ring placement prevents leaking.
- Large cap set screw prevents stripping.
- %u2018Double Taper%u2019 knuckle gives positive lock for vertical aiming and prevents undesired fixture movement. %u2018Rotate & Lock%u2019 knuckle option adds a full 360° of lockable, rotational aiming.
Available in 14 standard colors as well as several aluminum and bronze metal finishes.
CSA tested & certified to US & Canadian safety standards for wet location landscape use. |
|
- Available with halogen (PAR30, PAR38) or compact fluorescent (PAR30, PAR38) lamps. Lamp info: PAR30H, PAR38H, PAR30 & PAR38 CFL.
- Heavy walled cast aluminum or bronze with all stainless steel hidden hardware for a smooth exterior appearance
- Flush tempered glass lens can be removed for cleaning or replacement, and allows for use of up to two lens accessories.
- High temperature silicone wire pass-thru, gaskets, and O-rings are used to create a water tight fixture.
- Patented %u2018Rotate & Lock%u2019 knuckle gives a positive lock, prevents undesired fixture movement, and allows for a full 360° rotational aiming.
Available in 14 standard colors as well as several bronze metal finishes.
CSA tested & certified to US & Canadian safety standards for wet location landscape and wall mount use. 1 |
|
The PLUG & PLAY are a rpoduit ready with employment (no programming necessary) with catch sector 230V.
Projector color LED - 230V
- Projection until 6m
- Products of outside - IP 44
- Products available only on order
Advantages
Power
Low electricity consumption
Lightness and facility of installation
Great reliability
Allows the development of work of art, buildings, trees remarkable... with a great simplicity of operation and a great autonomy. |
|
- High maintenance-friendliness thanks to extremely long service life (up to 80,000 hours)
- UV- and IR-free light - thus no colour change and no heat on the illuminated objects
- No flickering
- Silent operation with low heat development
- Impact-resistant luminaire tube - class of protection IK 10 (in accordance with VDE 0470)
- System of protection IP 67 - suitable for indoor and outdoor installation
- Available in the colours red, yellow, green, blue and white
- Each fitted with 64 LEDs in series or parallel
- Two different lengths (700 mm or 1147 mm) available - special solutions possible
- Diverse mounting options
- Connection voltage 220-240 V
- Low-cost operation thanks to integrated transformer - power consumption 10 W |
|
The Mini projector is the best choice to decorate corners, small pools, steps and spas. The Mini model uses high light intensity LEDs with a much higher life span than traditional lamp models and a low energy consumption rate. With LED lighting you can create a wide range of different atmospheres thanks to its 12 colours and 9 programmes.
It can be synchronised together with standard projectors and flat LED projectors in the same pool. |
|
Underwater LED K2 - illumination in water
Underwater LED is a compact, innovative spot and recessed solution designed to create amazing effects in wet or water environments, like fountains. Fully IP68 to a depth of 10m, it offers a choice of beams - 12°, 25° and 40° - for precision illumination of, for example, fountains or ponds.
Underwater LED is available in blue, white and RGB versions; other colours are available upon request. |
|
| Cast bronze body. Cast bronze locking ring. A4 stainless steel screws. 5 mm flat clear tempered glass cover. Installation using the brass bracket provided. Fittings come with one 2 x 1,5 mm2 H07RNF cable, 3.0 m in length. Versions for other types of lamps are available on request. |
|
| NEPTUNE: bracket mounted and recessed waterproof projectors for swimming pools and funtains. All metal parts in 316L polished stainless steel, highly resistant to sea air, guarantee maximum heat dispersion. Notched bracket allowing for precision adjustment. IP68 waterproof submersible projector with high level of protection against vandalism. |
|
| ... products without information |
| |
|
|
Architectural lighting (exterior): projectors
