Interior insulation

... GUTEX Multitherm, a moisture resistant insulation wood fibreboard with single-ply construction and homogeneous cross section, is an ideal sarking board for exterior walls under facade facing. Nominal thermal conductivity ?D (W/mK) 0.039 ...

Thermal conductivity: 0.0405, 0.0364 W/(m.K)

... acceptance in the insulating of cryogenic low temperature storage tanks (particularly for the storage of LNG), in shipping containers, cold boxes (Air Separation Units), test chambers and in food processing. Advantages Perlite ...

Thermal resistance: max 0.23 m²K/W
Thickness: 33 cm

... Pre-assembled 33 mm-thick acoustic insulation panels, made of a 20 mm-thick SBR (Stirene Butadiene Rubber) rubber granules layer, assembled with a 12.5 mm-thick plasterboard. The panels dimensions are 1.20 m width x 2.00 m lenght. Use Wall, ...

Thermal conductivity: 0.038 W/(m.K)
Thickness: 40 mm - 240 mm

... Insulation board for universal application MULTITHERM 110 is a pressure-resistant wood fiber insulation board with a low weight and an excellent value of thermal conductivity. MULTITHERM 110 can be applied in roofs and ...

Thermal resistance: 0.2 m²K/W - 0.75 m²K/W
Thickness: 15 cm - 50 cm

... Thermal and acoustic insulation board, certified as eco-biocompatibile by ANAB-ICEA, consisting of Norway spruce wood wool bound with high strength Portland cement. The Norway spruce wood wool comes from certified sustainable forests. ...

... AKUSTIK FIREX Fire-resistant sound-absorbing and sound insulating polyurethane foam panel. Material Akustik Firex polyurethan foam having undergone impregnation treatment to enhance its already excellent acoustical properties and ...

... risks of poor indoor air quality and the effects of manufacturing on the environment. JM’s Kraft-Faced insulation is available in R-values ranging from R-11 to R-38 and in pre-cut batts to fit standard wall cavities. ...

... Ecowool® is available as natural Ecowool® and recycled Ecowool®. Natural Ecowool® insulation is 100% pure New Zealand fine, white wool. Recycled Ecowool® is coloured wool sourced from New Zealand woolen product manufacturers.- Ecowool® ...

... Panel for building industry Panel with visible joint Profile: Dogato/Special/Flat Width: 1.000 mm Thicknesses (mm): 25-30-35-40-50-60-80-100-120-150 ...

Vermiculite is a naturally occurring aluminium-magnesium silicate layer that expands with the application of heat. This expansion process is called exfoliation and the resulting material is used in bulk form or processed to boards by a press forming process. ...

... Product made from waste conifer wood. ACUSTIC® FL 50 Wood fibre Density 50 kg/m³ ACUSTIC® FL represents a product made from waste conifer wood. It is specifically treated and worked in order to produce wood fibre panels suited for thermal and acoustic ...

... of partition walls. It is mainly used as non-supporting wall for interior works and attic conversion. In the course of restoration the Hiss Reet Wall is also applicable as wall insulation. The Hiss Reet Wall can be applied ...

... blowing agent that has zero ozone depletion potential (ODP) Manufactured in accordance with BS/IS EN 13165:2008 Thermal insulation products for buildings. Factory made Rigid Polyurethane Foam (PUR) products. Specification. BS EN ISO ...

... Radiant floor system that‘s quick and easy to install, offering high performance and an excellent cost-benefit ratio Self-adhesive edge increases installation speed by reducing the need for butt joint tape Aluminized sheathing prevents clip movement ...

... Rubber has always been considered as the best anti-vibration material. Agglomerates of rubber granules can be produced in different densities to match elasticity, resistance and compressive strength agglomerate of technical rubber with very high density ...

Thickness: 15, 25, 40 mm

... Black PU film and absorbing polyurethane foam. APPLICATIONS Interior lining of soundproof cabins or vehicles where the danger of hydrocarbons or water coming in contact with the absorbent material exists. ...

SAGEX, the quality term for PS foam. During foaming, the polystyrene pearls are bloated using steam and at the same time bonded with each other. 1m3 polystyrene consists of 3-6 billion microscopically small, air-filled cells. SAGEX is indispensible in ...

Thermal conductivity: 0.039 W/(m.K)
Thermal resistance: 1.28 m²K/W - 6.41 m²K/W
Thickness: 5 cm - 25 cm

... at the end of the hemp seed harvest. Annually, the growth rate and versatility of this agricultural crop means that hemp insulation is truly sustainable and will flourish in diverse conditions. Hemp needs little water to grow and thus ...

... SIDERISE acoustic void closures are a range of bespoke products designed to effectively close small apertures and voids encountered in a wide range of building conditions. They are produced from a range of resilient materials or laminated composites ...

Thermal conductivity: 0.036 W/(m.K)
Thickness: 8 mm

... closed, on the interior. SPACE REFLEX® reflective sheet is perfect for the insulation of floors, due to its lightness manageability and easy application, creating the necessary comfort during its construction. SPACE ...

... Thermal insulation system supplied in rolls consisting of strips of fire-retardant expanded polystyrene laminated to an elastoplastomeric bituminous membrane with glass fibre or non-woven polyester reinforcement. The general physical ...

... Platon Flooring Protector isolates flooring from cold, damp concrete. When used beneath a wooden sub-floor and over concrete in a basement, it makes floors comfortable, odour-free, healthy and dry. Platon Underlayment, sub-floor vapour barrier Platon ...