Metal bollards

Designer: Stéphane CHAPELET STUDIO Dimensions Height: 1094 mm Diameter: 80 mm Materials: Steel+Cataphoresis / Stainless Steel Exotic Wood

VIC is a special shaped bollard, composed of a single shaped steel plate to create a particular effect of staggered lines. Atop a soft curve it closes the form. A base plate accommodates the dish bent and serves as an ...

The HI BOLLARD serves as both a bollard and a bike rack and is made in steel, 50/10 thickness. On the upper part of the bollard, there are 2 holes with a diameter of 20 and 30 mm. On ...

Pedestrian bollard with square shape made entirely out of steel sheets and provided on a square lower base support. The bollard’s shape and dimensions gives it dual-purpose as a seat. On request the bollard ...

Pedestrian bollard made from tubular steel, available in various sizes and heights. All models have a steel sheet upper plate and are available with base plate or extended for installation into concrete foundations. ...

Pedestrian bollard made of shaped steel sheet, with a square base with vertical and slanted grooves on two sides. POWDER COATED STEEL OR CORTEN STEEL FIXINGS: PRE-DRILLED FOR ANCHORS OR BELOW GROUND INSTALLATION

Height: 120 cm

High-security antiterrorist bollards (height 1200mm) The RB M50 automatic bollards (or active bollards) are retractable anti-ram devices capable of stopping a 7,5T vehicle at a speed ...

Height: 50, 80, 60 cm

Urban or anti vandalism bollards (height 500, 600 or 800mm) The FB C50 fixed bollards (or passive bollards) are devices capable of stopping a 3,5T vehicle at a speed of 32km/h (or 1,5T ...

Height: 60 cm

Removable urban bollard (height 600 mm) The FR bollard is a removable device used to block vehicle access Obstacle diameter - 275 mm Foundation depth - 300 mm Finishing: the bollard ...

Materials: reconstituted natural marble stone or white granite. Finishing: sandblasted. Accessories: steel eyebolt, stainless steel or copper band. Dimensions: RAY ⌀: 500 mm H: 784 mm ...

... PILOMAT 275/EM 600A are automatic electromechanical bollards designed by the Pilomat staff, who has worked in the the retractable technologies industry since more than 20 years. The 275/EM 600A bollard ...

Automatic hydraulic bollards with pump in the control unit housing. The PL series automatic bollards are the products with the best quality/price ratio of the hydraulic PILOMAT range. The current models ...

The P SERIES automatic bollards are the top line products of PILOMAT range. The current models are the result of the development of more than 20 years of experience. General features hydraulic movement: The most reliable ...

Height: 105 cm

The METIS© barrier is a sculptural object, a new way of seeing the delimitation of urban space by going beyond the functional to create an unparalleled repetitive "micro-event". Robust and artistic, METIS© is the result of the bold marriage ...

Height: 105 cm

The GREEN PALACIO© I barrier belongs to the GREEN PALACIO© Collection, a coordinated furniture line with organic and sleek shapes, heavily inspired by the plant world. The GREEN PALACIO© I barrier is versatile: it both defines the space ...

Height: 105 cm

The BUZZ© Barrier is a parking bollard with a classic sleek shape. BUZZ© in 15 mm thick corten steel cut with a laser. All corners are softened, all welds carefully cleaned and sanded to remove all sharp edges. Weight: ...

Height: 900, 500, 700 mm

Painted square steel tube and sheet stainless steel body, 5 mm thick. Fully stainless steel removable system, locked by triangular key. On the retractable version, automatic reset system controlled by triangular key. Steel: Zinc ...

Height: 900, 500, 700 mm

Exotica bollards - Street furniture. Body made from turned solid wood. Machined sold stainless steel head. Depth of seal 200 mm. On the removable version, fully stainless steel system locked by triangular key. Wood: ...

Height: 900, 700 mm

... controlled by triangular key. Steel: Zinc coating then baked polyester powder coating. Plug for removable system for posts, bollards and barriers.

The R&R range also includes the robust Rough&Ready Bollards: These robust beams in FSC® hardwood or in All Black are combined with a solid galvanized steel or CorTen steel frame. The beams are covered on the top and ...

Open Bollards are open pillars that perfectly match CorTen Bicycle Racks. The Bollards are available in fixed and removable versions. The fixed version can be fitted with LED lighting, which can be installed ...

Description Cast iron bollard To be embedded or with a locking removable system. Height : 26 cm ( above ground ) Diameter : 22 cm Finish : Shot-peening + 1 metal-coating + 1 coat of primer + 2 ...

Description Steel base, diameter 11 cm. Steel head with an aluminium cap, diameter 7 cm. Terracotta version Concrete part (Ductal), Terracotta colour. Other colour on request. Stainless steel version Brushed stainless steel ...

Description Natural lacquered aluminium head. Body : aluminium section 8 x 6 cm Height : 100 ou 120 cm ( above ground ) Finish : 1 chemical etching treatment + 1 trimetallic phosphatation + 1 epoxy polyester powder coating. RAL ...

... the powder-coated steel and the mirror finish stainless steel is not only flattering to the eye, it renders the Zénith low bollards discreetly and naturally compatible with roadway legislation for alignment identification. ...

The essential bollard, meeting expectations as fully as possible. At its service, the outdoor material par excellence: galvanized steel. Raw and unalterable, it confers an industrial style and extreme resistance to the ...

Height: 85 cm

Traditional and stable. This is Isac. A delicate, slightly conically shaped bollard, made of cast aluminium, does not deny inspiration from classical architecture. With its traditional design, it fits into historic ...

Height: 100 cm

Form and function. This is Lot. This smart bollard utilizes a simple L-profile in a unique way, finished with a simple top. Two cross-sectional sizes allow you to choose the right proportion for a variety of spaces. ...

Height: 105, 115 cm

... has found its perfect application in this bollard. The slim proportion and finely modelled shape following the popular Miela park benches. Installation in a row enhances the final effect of these unique bollards. ...

MATERIAL: METAL, HOT DIP GALVANIZED FRAME: FLAT BAR 15X60MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING

VERSIONS: FIXED, COLLAPSIBLE, REMOVABLE MATERIAL: METAL, HOT DIP GALVANIZED CASING: ROUND TUBULAR STEEL Ø76MM OR Ø121MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING

MATERIAL: METAL, HOT DIP GALVANIZED FRAME: ROUND TUBE Ø76 COVER: ALUMINIUM ALLOY SAND CASTING RESISTANT AGAINST SEAWATER POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING

Height: 1,000, 1,200 mm

HEDERA bollard hot-lacquered steel Vegetal contener sleeve with base plate

Bollard constructed from a galvanized and powder coated steel tube with a end cap in galvanized and powder coated sheet. Cod. 0212914 F: BASE PLATED D: Ø 150 mm (Ø 80 mm) H 1000 mm Cod. 0212914 F: EMBEDDED D: ...

Pedestrian bollard in steel tube with spherical element in powder coated cast aluminum.

Height: 800 mm

Tap bollard in a simple and cylindrical shape built in galvanized iron plus oxiron or imitation corten. Top cap in stainless steel. Bollards built with interior and exterior anti-rust galvanized iron ...

Height: 500, 750 mm

High-range hydraulic automatic telescopic bollards (with box caisson) designed for intensive use, impact and vandalism high resistance. Automatic bollards built with a tubular structure (rod), in galvanized ...

Height: 500, 750 mm

Mid-range hydraulic automatic telescopic bollards (with box caisson) designed for intensive use. Automatic bollards built with a tubular structure(rod), in galvanized iron.The chassis and the guides ...

Height: 120 cm

DDA complaint steel bollards are taller and have contrasting colours to ensure that they aid the visibly impaired to see them Ø 76 mm steel tube in 3 mm gauge featuring a polished elongated 316 stainless steel top ...

Height: 128 cm

Its’ innovative look makes it possible to manage urban spaces with simplicity and elegance. 70 x 70 mm steel tubes with no sharp angles. “Diamond curve” cast aluminium top cap. Height above ground: 1100 mm. Zinc primed and ...

Height: 510, 600, 700 mm

Steel bollard with a decorative stainless steel top for segregation of pedestrian areas. Bollard: Ø 270 mm. Bollard: Ø 220 mm. Bollard: Ø 160 mm. Zinc primed and ...

Bollard with massive construction and cone-shaped form. Made of high-performance concrete with natural aggregate. The marble and granite stones that form the aggregate structure are natural and offer different color combinations. ...

... sphere shaped parking restraint especially suited to limit unwanted parking on sidewalks with heavy pedestrian traffic. The bollard is made out of high-performance concrete and natural aggregate. The marble and granite ...

Height: 100 cm

Metal antiparking pole from the urban product range of road restraints combining functionality and aesthetics. Product made out of metal. The metal structure is coated with ester-epoxy ...

Height: 800 mm

The Quadra II is the middle bollard within the Quadra series. The right angles in combination with its width and length of 190 mm give this bollard a robust appearance. Compared to Quadra I, the Quadra ...

Bike Bollards are the ideal dual-purpose parking stands. They can be used to limit access to bike-only trails and parking areas while providing riders with secure parking. They can also be used as security and/or traffic ...

Wide range of metal bollards available both in cast iron and alluminium. They are suitable for furnishing historical centre and much more places, they are zinc plated and polyester powder coated in grey ...

Wide range of metal bollards available both in cast iron and alluminium. They are suitable for furnishing historical centre and much more places, they are zinc plated and polyester powder coated in grey ...

Wide range of metal bollards available both in cast iron and alluminium. They are suitable for furnishing historical centre and much more places, they are zinc plated and polyester powder coated in grey ...

Height: 30, 43 in

The symmetrical, balanced 1890 bollard has a distinctive fluted design that's ideal for any traditional urban setting. It's available in 30", 40", or 43" heights and can be customized with a bike rack attachment or illuminated ...

The commanding fluted column Chicago bollard, inspired by the best of Neoclassical traditions, makes an ideal barrier for situations where perimeter security is paramount. The reinforced version can be set over a Schedule ...

The large, ornamental Historic bollard with decorative scroll work is popular for protecting and accenting historic landmarks. A locked door opens to a convenient storage area. Can be fitted with eyebolts for an optional ...

Retractable power tower VM03 flip lid unit The flip lid supply unit VM03 is part of the New VMR retractable power tower for the distribution of energy and other complementary services, such as water, compressed air, data transmission ...

The VM01 power tower is part of the retractable power tower family and is the solution for distributing, in total safety, electric energy and other services, such as water, compressed air, data transmission and sound systems. The unit ...

The retractable supply unit VM04 is part of the retractable power tower family and is the solution for distributing, in total safety, electric energy and other services, such as water, compressed air, data transmission and sound systems. The ...