... has many uses as a structural panel. It consists of an extruded hard foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in the tile adhesive. ...
Schluter-Systems
Gonon Isolation AG (SA)
Gonon Isolation AG (SA)
thermal insulationSTYRODUR® 4000 CS / 5000 CS
Gonon Isolation AG (SA)
Vacupor® NT is the standard design of our vacuum insulation panel. Through the use of different barrier foils, Vacupor® - NT can be adapted individually to the requirements of different applications, ...
Porextherm Dämmstoffe GmbH
... rated value of 0,007 W/(m*K) Vacupor® NT-B2-S is the basic version of our building authorities approved "S-type" Vacuum Insulation Panels. The German Institut for civil engineering (DIBT) granted the ...
Porextherm Dämmstoffe GmbH
... is the extruded polystyrene foam (XPS) sheet protected version of our building authorities approved "S-type" Vacuum Insulation Panels. Rated value: 0,007 W/(m*K) The German Institut for civil engineering ...
Porextherm Dämmstoffe GmbH
Cavity Barriers - External Envelope KEY FEATURES Allow continuous ventilation and drainage behind cladding Up to 120 minutes fire integrity Tested to ASFP Fire Resistance Test of Open State Cavity Barriers utilising BS EN ...
Siderise Group
... offer an extensive range of solutions for fire stop, smoke stop and sound barrier requirements in all architectural cladding panel applications. Based on the experience gained through being the premier supplier to ...
Siderise Group
SIDERISE mullion/transom inserts comprise a range of specialist material components intended to improve the sound insulation performance of lightweight hollow framed facades or glazed areas. Whilst the inserts may ...
Siderise Group
Thermal resistance: 0.35, 0.5, 0.7 m²K/W
Thickness: 25, 35, 50 mm
Placoplatre
Weber Industries
Thermal conductivity: 0.032 W/(m.K)
Thermal resistance: 3.15, 3.75, 4.35 m²K/W
Thickness: 101, 120, 140 mm
URSA France
Thermal conductivity: 0.022 W/(m.K)
Thermal resistance: 1 m²K/W - 6.5 m²K/W
Thickness: 25 mm - 140 mm
TMS® is a rigid polyurethane (PUR) thermal insulation panel with composite facing on its two faces used for buildings. SPECIFICATIONS Conditions for using of TMS® panels: as ...
Thermal conductivity: 0.17 W/(m.K)
SUPALUX® is a non-combustible calcium silicate board reinforced with selected fibres and fillers. It is formulated without inorganic fibres and does not contain formaldehyde. SUPALUX® is off-white in colour and has ...
Promat
Type GE is an elastomeric stud non-shrink slip bearing with Teflon sliding layer. The horizontal displacements of the structure are taken up by deformation of the support itself. This results in a horizontal restoring force. The horizontal ...
... system - on the insulation, get set, go! For new applications – just unfold it and you're done For new applications in radiant heating and cooling systems, Roth provides the new Flipfix Tacker system. It is suitable ...
Impact noise level Underlaying floor insulated with EKOSOL 31 dB³
Thermal conductivity: 0.038, 0.039, 0.048, 0.05 W/(m.K)
Thickness: 80 mm - 200 mm
... circumference Sound-absorbing and vapour-permeable UdiRECO wood-fibre insulation boards are offered as a system solution. Façade insulation Interior insulation Insulating ...
Thermal conductivity: 0.07 W/(m.K)
Thickness: 23 mm
The slim, interior insulation board. Suitable for direct rendering. UdiIN 2CM Wood-fibre insulation board Interior insulation system. Innovative composite of wood-fibre ...
Thickness: 12, 25 mm
The aim of this product is to avoid the noise and vibration transmission through the solid material by introducing elastic mounts, with the advantage that we can provide solution to different machines with just one product.
AMC Mecanocaucho
Thermal conductivity: 0.032 W/(m.K)
Thermal resistance: 1.85, 3.15, 3.75, 4.35 m²K/W
Length: 135 cm
ISOVER SAINT-GOBAIN
... recommends that its products be installed according to the recommendations of the North American Insulation Manufacturers Association (NAIMA). CertainTeed insulation products improve building energy ...
Certain Teed
Thermal conductivity: 0.034, 0.035 W/(m.K)
Length: 1,200 mm
Width: 600 mm
... Ventilated Cladding Insulation RainScreen Duo Slab® is a BBA-approved insulation product, that in addition to thermal comfort, provides an independently-tested acoustic benefit. RainScreen Duo Slab® ...
ROXUL
Thermal conductivity: 0.022 W/(m.K)
Thermal resistance: 1.35 m²K/W - 9.05 m²K/W
Length: 1,200, 2,400 mm
IKO enertherm ALU is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality reflecting ...
IKO
Thermal conductivity: 0.032 W/(m.K)
Thickness: 100 mm - 200 mm
The new standard for inverted roof insulation λ0.032 W/mK Up to 11% improved insulation performance.* Potential for significant thickness savings. Offered in single extruded thicknesses from 100mm ...
Dow France
Thermal conductivity: 0.039 W/(m.K)
Length: 1,200 mm
Width: 600 mm
... is a natural thermal and acoustic insulation mat made from flax fiber. NATURIZOL is the perfect choice for thermal and acoustic insulations of roofs, ceilings, and walls. Advantages of NATURIZOL • ...
JUTA
thermal insulationALSATHERM SOL DENSITE + NC
Thickness: 17, 8 mm
... down a stairs. If high-quality impact sound insulation such as VIBRAX-MULTI is not provided, the resulting vibrations can cause disturbances in neighbouring or connecting areas. Impact sound insulation ...
Profloor Dynamic Deck 26 provides the high degree of isolation necessary to give significant improvements in impact sound insulation. Profloor Refurb Deck System utilises the dynamic properties of dual foam technology ...
A. PROCTOR GROUP
Thickness: 40 mm
CHARACTERISTICS: Joint: R – residential Width (mm): 500 Thickness (mm): 40 External finish: L (smooth) Internal surface: flat / ribbed Internal finish: GS (stucco) Profile height: standard
MARCEGAGLIA
Continuous Insulation System Dri-Design has always held performance at the forefront of everything we do, resulting in one of the highest tested systems on the market. With the Dri-Design Continuous Insulation ...
Please specify:
Help us improve:
remaining