{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
This high-density, closed-cell polyurethane foam can be custom-formulated to produce an extremely strong yet lightweight building material with decorative or load bearing properties.
BASF USA
... use in open joint systems where UV rays can degrade other insulations. Easy to fabricate and install. Semi rigid mineral wool can conform to jobsite irregularities much better than rigid insulations to ...
Thermafiber, Inc
ISOSYSTEM
Thermal conductivity: 0.037 W/(m.K)
Thickness: 50, 75, 150, 100, 80 mm
Protection against rainy days Cavity insulation is essential to provide weather-tight protection against inclement weather. The potential for damage caused by moisture can compromise insulation performance, ...
ROCKWOOL
Thickness: 40, 50, 60, 80, 100 mm
High-density, glass wool insulating panels for thermal insulation systems. TECHNICAL DATA: Composition: high density glass wool. Colour: yellow. Thickness available cm: 4, 5, 6, 8 ...
... performance than conventional EPS. The blocks are then cut to boards of different thicknesses. Neopor® insulating materials offer greater insulating performance and up to 50 percent ...
BASF Energy efficiency
Thermal conductivity: 0.032 W/(m.K)
Thermal resistance: 1.4 m²K/W - 5 m²K/W
Thickness: 45 mm - 160 mm
ISOVER SAINT-GOBAIN
Thermal conductivity: 0.037 W/(m.K)
Thickness: 50, 75, 80, 100, 150 mm
Protection against rainy days Cavity insulation is essential to provide weather-tight protection against inclement weather. The potential for damage caused by moisture can compromise insulation performance, ...
ROCKWOOL
Thermal conductivity: 0.036 W/(m.K)
Thermal resistance: 1.35, 2.05, 2.75 m²K/W
Thickness: 50, 75, 100 mm
... Potential (ODP) and Global Warming Potential (GWP) of less than 5. Thermal Insulation for Lightweight Steel Frame Applications Steel Frame Infill Batt is a glass mineral wool insulation, supplied ...
ISOVER SAINT GOBAIN
Dark cork panel for thermal and acoustic insulation of cavity walls, walls, roofs and ceilings. Cork panel for the thermal and acoustic insulation of buildings, made ...
... rigid boards with smooth or embossed surface, sharp edges, rebated or male-female interlock, density 300 to 700 kPa High comfort levels with Tegotherm XPS The thermal insulation of buildings using ...
TEGOLA CANADESE
... mechanical fastening of the boards, flat roof designed for vehicle traffic, thermal insulation from the inside, thermal insulation of domestic flooring or floorse, thermal insulation ...
TEGOLA CANADESE
Insulation of roofs ΛD: 0,028 W/MK REACTION TO FIRE: Euroclass F COMPRESSION STRENGTH: 150 kPa (10% of the deformation load) UPPER LAYER: Bitumen felted cardboard BOTTOM LAYER: Bitumen felted cardboard Main applications Insulation ...
TEGOLA CANADESE
Thermal conductivity: 0.035 W/(m.K)
Thickness: 40 mm
Soundproofing panel, waterproof and incombustible, suitable for the realization of stratified walls, made of a double layer of 20 mm thick rock wool and density 100 kg/m3 with an interposed element in the sound-resistant ...
ETERNO IVICA SRL
Thermal conductivity: 0.039 W/(m.K)
Thickness: 40 mm
... a pre-coupled panel consisting of a double board of wood fiber with interposed a sound-absorbing panel in TXT ideal for the realization of isolated interspaces, with high performance ...
ETERNO IVICA SRL
Thermal conductivity: 0.038 W/(m.K)
Thickness: 40 mm
... stratification.” The laminated walls associated with soundproofing panels provide distinctly higher performance than monolithic walls, at the same thickness. Biwood is a panel with high sound insulation, ...
ETERNO IVICA SRL
Thermal conductivity: 0.036 W/(m.K)
Thickness: 4 mm - 100 mm
... information wedi building board systems wedi building boards have a blue core made from CFC-free extruded polystyrene rigid foam. This makes the wedi building board an ideal basis for ...
wedi GmbH
Thickness: 12.5 mm - 50 mm
„The special building board for rooms with high humidity.“ Product information wedi building board Vapor is a composite element made from extruded polystyrene rigid foam which is reinforced on both ...
wedi GmbH
Thickness: 8, 17 mm
... compliance with increased sound insulation requirements. The extremely and permanently elastic material, consisting of a combination of rubber granulate/fibres with polyurethane binding agents, ensures optimum sound ...
wedi GmbH
solmass is the alternative sound insulation solution. Trocellen developed Isolmass in order to satisfy those customers who prefer not using lead with their sound insulation solutions. Isolmass products ...
Trocellen Italia
Isolmass is the alternative sound insulation solution. Trocellen developed Isolmass in order to satisfy those customers who prefer not using lead with their sound insulation solutions. Isolmass products ...
Trocellen Italia
Isolmass is the alternative sound insulation solution. Trocellen developed Isolmass in order to satisfy those customers who prefer not using lead with their sound insulation solutions. Isolmass products ...
Trocellen Italia
Thermal conductivity: 0.035 W/(m.K)
Thickness: 4 mm - 80 mm
... they are ready to be tiled, rendered or plastered. Their excellent thermal insulation properties make them ideal for use as effective thermal insulation. The construction boards are perfectly ...
Jackon Insulation
Thermal conductivity: 0.035 W/(m.K)
Thickness: 4 mm - 80 mm
... they are ready to be tiled, rendered or plastered. Their excellent thermal insulation properties make them ideal for use as effective thermal insulation. The construction boards are perfectly ...
Jackon Insulation
Thermal conductivity: 0.035 W/(m.K)
Thickness: 20 mm
... corners, reveals and pipe boxing. JACKOBOARD® Canto angle elements are the ideal complement to JACKOBOARD® Plano construction boards and enable the time-saving construction of visually attractive interior cladding, ...
Jackon Insulation
Thermal conductivity: 0.039 W/(m.K)
Thermal resistance: 1, 1.5 m²K/W
Thickness: 40, 60 mm
- acoustic insulation against impact and airborne sound - enables mechanical fixing of the deck to the battens - excellent insulation qualities - water vapour open - enhanced vapour transfer - ...
STEICO
Thermal conductivity: 0.04 W/(m.K)
Thermal resistance: 0.5 m²K/W - 6.25 m²K/W
Thickness: 20 mm - 250 mm
... wall with insulation, Metal stud over masonry wall with insulation, Double Wall with insulation fully filling the cavity, Internal partitions with insulation lined on ...
Amorim Isolamentos SA
Thermal conductivity: 0.023 W/(m.K)
Thickness: 3 cm - 12 cm
POLYSOL IP 35 PLUS is an insulating system obtained through the hot bonding of a smooth or mineralcoated plastomeric waterproofing membrane reinforced with glass fibre non-woven polyester fabric to sheets of foam PUR/PIR ...
Polyglass Spa
A non-combustible board for the fire protection of ductwork With excellent thermal insulation properties and dimensional stability at high temperatures. Ideal to protect sheet metal ducts and for the ...
Promat
SUPALUX® is a non-combustible calcium silicate board reinforced with selected fibres and fillers. It is formulated without inorganic fibres and does not contain formaldehyde. SUPALUX® is off-white in colour and has ...
Promat
... applications Class 0 Building Regulations Limited combustibility BBA Certified The Versatile Fire Protection Board A multi-purpose board suitable for a variety of applications offering up to 30 minutes ...
Promat
The insulation of the ceiling of cold unheated rooms such as garages, cellars, ancillary rooms and technical rooms are of fundamental importance, not only to ensure thermal comfort and the absence of condensation for ...
CELENIT
Heat loss through the structural elements of a building, called thermal bridges, can reach and exceed 20% of the total dispersion and they cause internal condensation that leads to stains and mold, with the consequential deterioration ...
CELENIT
Thickness: 15 mm - 75 mm
... suitable for all type of applications CELENIT N/C specific for external insulation covering CELENIT R specific for roofing insulation CELENIT RAB specific for roofing ...
CELENIT
Thermal conductivity: 0.031 W/(m.K)
Thickness: 30, 15, 25 mm
... simple way to isolate the shutter box in rehabilitations. It consists of a panel of Neopor with a thermal transmittance U = 0,031 W/m2*K, A diffusion layer and other flexible panel Neopor. It has different ...
CAJAISLANT
Thermal resistance: 0.04 m²K/W
Thickness: 14, 24, 3.5 mm
... density 8 kg / m2 It provides optimum insulation that achieves reduced 30-38 dB which adds to the acoustic insulation already held by the enclosure and the shutter box. It also offers excellent thermal ...
CAJAISLANT
Thermal conductivity: 0.022 W/(m.K)
Thickness: 50 mm
A multi-purpose insulator for any type of industrial, commercial or residential building. Guarantees energy efficiency insulation for roof, floor, wall, ceiling in any type of old or new properties. Designed for easy ...
PROFHOLOD
Thermal conductivity: 0.022 W/(m.K)
Thickness: 50 mm
Design for areas with high risk of water leakage: for insulation of roofs, grounds, showers and bathrooms, etc Dimensions: 600х1200х50 mm Core material: PIR Premier Coating: Vinyl film Package: 5 pcs, 3,6 sq. m Thermal ...
PROFHOLOD
Thermal conductivity: 0.022 W/(m.K)
Thickness: 50 mm
Ideal thermal insulation for saunas and steam bath houses. Recommended for use in high temperature areas, close to stoves, boilers, chimneys, fireplaces, heating batteries. Dimensions: 600х1200х50 mm Core material: ...
PROFHOLOD
Activities in fitness studios undoubtedly result in impact sound emissions. Weight training equipment, free weights, dumbbells and kettlebells used by fitness athletes typically generate impact sound and vibration which, combined with ...
REGUPOL BSW GmbH
Thickness: 8 mm
Largely moisture-, age- and deformation-resistant, permanently elastic, but protect against large volumes of water. MaterialPU-bonded elastomers Standard delivery formin rolls of 14.95 m² each, 13,000 x 1,150 x 8 mm Temperature resistancefrom ...
REGUPOL BSW GmbH
Thermal conductivity: 0.075 W/(m.K)
Thermal resistance: 0.1 m²K/W
Thickness: 8 mm
Largely rot-, moisture-, age- and deformation-resistant, permanently elastic. MaterialPU-bonded rubber fibres Standard delivery formin rolls of 14.95 m² each, 13,000 x 1,150 x 8 mm Temperature resistancefrom -20 °C to +80 °C Colouranthracite Physical ...
REGUPOL BSW GmbH
Thermal conductivity: 0.04 W/(m.K)
Thickness: 23 mm
Impact noise insulation sheets Use Soundproofing floors against impact noise in compliance with Italian PM Decree of 05/12/97, by creating a floating floor subsequently applied with coverings such as ceramic, wood, ...
Fassa Bortolo
Please specify:
Help us improve:
remaining