Roof smoke vents

The Apollo natural flap ventilator provides both smoke and day-to-day ventilation. It allows extract ventilation for most kinds of industrial buildings and is usually installed on building rooftops. Polycarbonate ...

... applications - Apollo ATI is classed as a dual purpose ventilator, providing both day to day and smoke control ventilation. Apollo ATI is generally installed onto roofs providing high level extract. Polycarbonate ...

... 140 is a combined AOV smoke ventilator and roof access hatch designed providing either 1.0m2 or 1.5m2 measured free area in accordance with Approved Document B, Appendix C. It is suitable for use as a ...

Colt Firelight is a natural casement roof ventilator, suitable for natural smoke control. It has high aerodynamic, acoustic and thermal performance, providing extract ventilation for most kinds of industrial ...

Airlite is a natural louvred ventilator suitable for natural day-to-day climate control as well as smoke control. It can provide inlet and extract ventilation as well as the entry of natural daylight for most kinds of ...

Stairwell is a low profile, roof or wall mounted louvred ventilator, designed to provide heat and smoke exhaust ventilation in protected stairwells within residential apartments, hotels, shops and offices. ...

... Seefire smoke vent is also often used as a termination piece for large ducted or air handling systems. There are pneumatic, electric or hand controls and a wide range of louvre types, accessories and ...

... product, as it’s top section provides maximum ventilation. WCO can also be used for emergency smoke extract ventilation, although it is not certified as a smoke ventilator. Two controllable side dampers ...

... – The ventilator’s design will not allow water entry into the building at any wind velocity. All water is collected by integral drain gutters and downspouts and re-directed out to the roof. The ventilator ...

... Equipped with thermal break upstand, made for positive cold buildings (temperature between 0° and 4°C). Ideal for natural smoke ventilation, ventilation and natural lighting in your buildings. The device has a classic ...

Certilam T is a roof device with pivoting blades. It is an ideal product to provide a solution for natural smoke extraction and ventilation. Thanks to its numerous frame profiles, Certilam T can be ...

Bluesteel RPT Pneu device is a pneumatic NSHEV with thermal break upstand for waterproofed roofing. Used for natural lighting, smoke ventilation and ventilation. The device has a classic polycarbonate infill but can ...

... waterproofed roofing with thermal improvement and doble wind-breakers. Used for natural smoke ventilation, ventilation and natural lighting. Up to 4,62m² smoke ventilation area. Available with 4 aeraulic ...

Certilux TPP is a pneumatic NSHEV with standard steel upstand. - - Smoke extraction and ventilation functions without wind grip - - Insulated polycarbonate (PCA) blades pivoting on an aluminium frame surrounded by windbreaks.

The Certilight is a roof-mounted NSHEV for smoke extraction. It is equipped with 2 leaves opening face to face with visible mechanisms. It is the ideal device providing a solution for ventilation, ...

The Ventilight smoke vent is a single-panel roof device which opens in the direction of the slope or at the bottom of the slope. The Ventilight is equipped with visible mechanisms ...

Ventibaie is a NSHEV single-panel roof designed for natural smoke extraction and ventilation.Thanks to its invisible motorisation, incorporated in the profile, the Ventibaie product adapts to all types ...

... transparent, pivoting slats. Single-glazed or PCA, the device is ideal to provide a solution in terms of ventilation, natural smoke extraction and zenithal lighting. Its numerous frame profiles allow Certilux T to ...

... ventilation position (double purpose vent) - maximum vent opening time to working position: 60 [s] - vent opening angle: ≥140º Parameters - smoke vents ...