Smoke extractor fans

PSO-JFA fans are JET FAN impulse devices that allow to solve ventilation problems in underground car parks with powered ventilation, removing most common pollutants, controlling smoke ...

Air flow: 0 m³/h - 2,500 m³/h

... integrated control (EC controller) speed is 100% infinitely variable The casings are made of galvanised sheet steel. The fans are only suitable for indoor installation. Backward curved high-performance impellers ...

... ColtShaft Constant. The ColtShaft Variable incorporates duty and standby variable speed extract fans with inverter drive, linked to pressure sensors within the lobby and corridor at each level via ...

Air flow: 0 m³/h - 27,601 m³/h

... control input Modbus controllable Fire mode DVG smoke and heat extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for ...

Air flow: 1,000 m³/h - 4,000 m³/h

Belt-driven smoke exhaust fan. 2 models : ProtectONE® TA (forward curve): 9 box fan sizes, airflow 1,000 to 40,000 m3/h. ProtectONE® TR (backward curve): 8 box fan ...

... pressure can be achived on larger fans with a maximum diameter of 7100 mm through adjustable pitch angle. Four standard casing types are avai- lable. ■ Models Shown in this catalogue 1. Wall fan HQ - ...

Air flow: 1.6, 0.8, 2.7, 1.4 m³/s
Weight: 113, 146 kg
Height: 273, 332 mm

Centrifugal Induction Fan • 2 standard sizes, 50N and 100N • Removes car park pollutants including smoke without the use of ducting • Suitable for operating temperatures up +300°C for 2 hours • ...

... range of fans are designed to extract hot gases from corridors and lobbies via smoke shafts. All fan sets are tested to European Standard EN12101-3 and installed as part of a fire engineered ...

Power: 1,500 W - 18,500 W

Roof-mounted centrifugal fan for smoke extraction with vertical air discharge. Smoke exhaust fans are used in emergency exhaust ventilation ...

Air flow: 2,000 m³/h
Weight: 23.4 kg
Height: 215 mm

Air flow: 8 m³/s - 23.7 m³/s
Noise level: 63, 53, 70, 48, 55 dB
Weight: 123.4, 139.3, 114, 148 kg

Jet Fan System is used for exhaust of smoke and harmful gases under control in case a fire occurs at car parks besides daily ventilation of car parks. It prevents smoke ...

Air flow: 1,600 m³/h - 17,000 m³/h

Air flow: 0 m³/s - 42 m³/s

Air flow: 200 m³/h - 19,000 m³/h

Air flow: 450 m³/h - 3,110 m³/h

Axial fans are designed for installation in walls and ventilation ducts.

AB Chimney Axial fan provides a powerful air flow by means of ideal blade angles. Motors with sintered sleeved bearings provide silent operation. Easy to install in walls and windows. Material Electrostatic powder coated ...

... enclosed belt and ball bearing housing Adjustable motor base for proper belt tension Rugged cast aluminum blade, non-sparking Fan can be mounted to operate in any position 1 year limited warranty

Air flow: 0 m³/h - 1,250 m³/h

FEATURES In Line centrifugal high performances fans to convey air or fumes through ducts. Suitable for domestic, commercial and industrial environments. Max temperature of extracted air: 55°C. The range is composed ...

... performance 007-05-CPR-2015 for F600. CE Declaration of conformity W/01/A/2012. Roof smoke exhaust fans type mcr Pasat with radial rotor are designed for removing smoke ...

Range of direct-drive rectangular in-line fans designed for smoke extraction in fire conditions and certified F400 120 (CE marked). All models are suitable for air stream temperature up to 80ºC. The ...