Tanks

UNDERGROUND TANK CANOTTO Underground modular tank in high density polyethylene (LLDPE) fitted with hinged inspection cover. This kind of container is used for storing potable water, rainwater and other ...

UNDERGROUND TANK Mod. NANOTANK Modular type underground tank in linear high density polyethylene (LLDPE) fitted with hinged inspection cover. This type of underground tank is used ...

ABOVE-GROUND TANK model CISTERNA Above-ground tanks in one-piece linear high density polyethylene (LLDPE) fitted with threaded inspection cover with vent and outlet and drain holes. These containers ...

... available: Tanks for underground installation: - Vertical tanks - Horizontal tanks Tanks and containers for above-ground installation: - Cubic tanks ...

Capacity: 330 l - 660 l

Capacity: 7 m³

HEIGHT1950 mmWIDTH1860 mmLENGTH2960 mm-* these are the full set measuresCAPACITY±7,2 m3TOPS2DESCRIPTIONset contains 2 tops

Capacity: 3 m³ - 5 m³

Capacity: 5 m³

The ideal solution when clean water, rain water, gray water and waste water must be delivered to sewer mains located at a higher level, or where gravity drainage is not possible.

... Armtec can help with various type of industrial, infrastructure and engineered systems: • Blast/Fire Rated Structures Custom Tanks • Compressor Machinery Pump Jack Bases • Containment/Dyke Wall • Custom Modular Manholes • ...

Features Large cap screw with seals. Level indicator recorded on the outer surface. Food quality material. Designed to allow mounting compact and sturdy with agitator, metering pumps, suction devices or probes.

Capacity: 50 l - 120,000 l

... Possibility of making double wall or insulated. UV resistant. High mechanical strength and absolute watertightness. Special tanks for diesel or fuel oils. Applications Storing all liquids: water, wine, spirits, ...

Capacity: 10 l - 40,000 l

Features Recovery of rainwater by collecting water from a surface (roof), filter it and store it in a bueried tank for later use. This water is then circulated by a pump through a separate circuit from the drinking ...

Capacity: 100, 200 l

... Technical data Q max 46.0 m³/h H max 24.0 m Design Stable above-floor plastic collecting tank or impact-resistant underfloor plastic collecting tank, with floor drain and odour trap, both with ...

... Design Single-piece water-tight collecting tank made of PE-HD, equipped with Ama-Drainer N submersible motor pump with integrated float switch. Application Disposal of domestic waste water from septic tanks ...

... back-up function if the rainwater storage tank is empty, with integrated dry running protection and demand-driven automatic pump control. Hya-Rain N version with analog level measurement in rainwater storage tank ...

Capacity: 1 m³ - 10 m³

Plastic tanks for the storage and subsequent use of rainwater. Due to various roof shapes and coverings, not all rainwater is drained off the roof. This is expressed by the “drainage coefficient” (0.6 to 0.8). When rainwater ...

... attenuation solutions give you maximum control over rainwater discharge. With these Wavin units you can create underground tanks quickly and easily. Non-inspectable units can be used in combination with inspectable and ...

In-Line Attenuation Tanks In-line systems allow the water to back up through the tank and drain by gravity through the flow regulator. This system is normally used for installations where a fall through ...

Large Volume Stormwater Storage CON/SPAN is a modular precast system designed to provide economic, large volume stormwater detention or infiltration below grade. CON/SPAN’s distinctive arch top and vertical side walls maximize storage ...

Capacity: 350 l

Flo-Well manufactured dry well presents an easy to install and sustainable solution for stormwater runoff. Used independently or as part of a larger stormwater management system, Flo-Well units collect, retain, and discharge stormwater ...

Rainwater management and surface water treatment Demographic change and climate change are forcing municipalities to establish water infrastructure concepts more flexible and economical than ever before. Rainwater run-off from sealed ...

... guarantee low weight, low installation depth one-piece no joints or seams all tanks truck-driveable up to an axle-weight of 11.5 tonnes BlueLine underground tanks are constructed monolithically ...

... Aerated Filters (SAF). The WPL Balancing Tank is sized specifically to cope with these variable fluctuations or depths of invert. The balancing tank incorporates controls which measures the level within ...

... as a basin in an urban environment or as an underground fire storage tank. The EPDM geomembrane makes it possible to ensure that ULCS (Ultra-Light Cellular Structures) underground tanks are watertight. ...

Capacity: 10 l - 3,000 l

... walled tanks.. UNE 62351-1: Single wall tanks. UNE 62351-2: Double steel-walled tanks. Cuboid above-ground tanks of up to 2000 litres’ capacity: UNE 62352 European ...

Modular system for the creation of accumulation and draining systems DRAINPANEL is a modular element made of regenerated PP for the creation of underground basins for on-site rainwater management. The system can be used both as lamination ...

... production facilities by our qualified teams, Tubao metallic tubes play an important role in water management. Retention tanks, stormwater drains, underpasses and overpasses, culverts, conveyor protection conduits, ...

Relocatable storage tanks for all liquid types. The high-grade, relocatable Covertec flexible tank can hold virtually any type of liquid and offers both a short-term and permanent solution to your storage ...

... to a maximum of 300,000 m3. The Industrial Tanks designed by PaverIndustry are a great solution because: Each component is statically independent so tanks of any surface area and volume can be made. The ...

In undeveloped areas, rainwater is unrestricted and may be absorbed directly into the ground on which it falls. When an area is developed, buildings and parking areas overcome the natural absorption area where the rain would normally ...