Tile mortars

... setting pourable adhesive for the interior and exterior bonding of all types of medium and large sized ceramic and stone floor tiles in environments subject to heavy traffic. Can also be used as an internal and external ...

is self-levelling mortar with fast-hardening fibres for levelling and regularisation of bases for installation of all types of interior flooring. From 3 to 30mm thickness. Especially recommended for the installation of ...

... adhesive: 24 hours - with fast-setting adhesive: 6 hours - with mortar: 7-10 days Wall application: - with normal-setting adhesive: 6-8 hours - with fast-setting adhesive: 6 hours - with mortar: ...

Two-component, translucent epoxy grout for grouting transparent glass or artistic mosaics with joints up to 3 mm. Product with ultra-low volatile organic compound (VOC) emissions. Technical Features Colours:700 Crystal Mixture ...

Two-component, translucent, acid-resistant epoxy grout for grouting any type of glass mosaic with joints up to 3 mm width. Product with ultra-low volatile organic compound (VOC) emissions. Technical Features Colours:800 Grey Oslo ...

... THIN SCREEDS. SUITABLE TO TAKE ALL TYPES OF ADHESIVE FLOORING DESCRIPTION Massettomix Paris 2.0 is a fibre-reinforced mortar of semi-dry “damp soil” consistency for internal use as a screed. It is premixed and ...

Professional powder cement grout, composed of hydraulic binders, selected mineral fillers and special additives, for high resistant grouting with a fine finish of ceramic walls and floors. Good workability, ease of application and easy ...

... high abrasion-resistant grouting of joints from 1 to 20 mm between ceramic tiles of all types, porcelain and marbled stoneware, thin slabs, large sized, clinker, earthenware tile, glass and marble mosaics, ...

Professional powder cement grout, composed of hydraulic binders, selected mineral fillers and special additives, for high resistant grouting with a rough finish of ceramic walls and floors. Good workability, ease of application and easy ...

... ceramic tiles. CLASSIFICATION ACCORDING TO REGULATION CG 2 according to UNI EN 13888 APPLICATIONS Grouting of the joints between ceramic materials, from 2 to 15 mm wide. Suitable for indoor and outdoor applications. ...

... Classified as CG2WA to BS EN 13888 and specially developed to complement modern tile designs and décor. Suitable for use with porcelain, ceramic, natural stone and glass tiles and mosaics in domestic ...

Special tile adhesive with additives, non slip, suitable to fix ceramic tiles using thick layers of adhesive. Recommended for fixing tiles over plaster and clay substrates or for large ...

Epoxy antacid two-component mortar for laying and filling of ceramic tiles and mosaics with joints of width between 1 and 15 mm. Resistant to UV rays exposure and weather and climate action. Composition Epoxy ...

Very fine and plastic water repelant coloured mortar. For grouting 2 to 15 mm joints in all kinds of floor tilings. Special for grouting low-porosity pieces (porcelain stoneware) and swimming-pools. and for the application ...

Ecological solid glue is used for bonding ceramic tiles, and it is ideal as an anchor for insulation boards and non-flooding solutions. Composed of a mixture of lime fat obtained through the thermal processing of limestone ...

... realization of mortars for lightweight single-layer base screed with Piano Zero system for direct gluing of floor coverings (see technical data sheet and the application manual). Drying time for direct laying of floor ...

Visto Acrylic Spatula Putty (Stucco) White water-based acrylic putty for interior and exterior use. Ideal for tilling and coating walls, plaster, concrete, poronbeton, plasterboards, cementboards. It is easy to use, has excellent working ...

The grout is intended for jointing tiles, bricks and clinker profiles. It can be also used to joint wall and floor ceramic tiles, concrete tiles, laid on indoor and outdoor surfaces. The ...

MAIN DATA Waterproofing, bicomponent, elastic, cement-based leveling mortar for swimming pools, terraces and balconies prior to fixing ceramic tiles. APPEARANCE Comp. A: grey powder Comp. B: white ...

EPOJOINT CERAMICS is a product based on epoxy resins for sealing the joints between stoneware, ceramic tiles, etc. It is easy to remove with water. Thanks to its specific formula, EPOJOINT CERAMIC is ...

... , specifically designed for grouting and affixing ceramic tiles and mosaics with joints having a width of between 2 and 15 mm. EPOSEAL W meets the requirements of both EN 13888 (reactive mortar for joints ...

Hydraulic binder-based coating, used for water proofing on inside and outside surfaces (pressure, back pressure) : swimming pools, water tanks, foundations, cellars, etc. Colours: Grey, White