White detectors

In addition to conventional intruder detection Chubb intrusion panels are also able to support safety detection devices, which are designed to provide end users with early warning of potential threat to either persons, employees or property ...

This sensor contributes to advanced system such as ADAS (Advanced Driver Assistance Systems), autonomous driving, and more, in order to detect 6DoF data which are composed by 3 axis (forward and backward, left and right, ...

... 180 flex is a flush-mounted motion detector with a 180-degree lens. It combines design, detection quality and flexibility in use and thus offers you the ideal solution in various application areas. Motion detector ...

The ChemCheck chemical detection system is easily installed in the feed tube of any Norweco tablet feed system. Once installed, homeowners and service providers no longer need to be concerned about monitoring chemical levels in Singulair ...

Width: 94 mm
Length: 94 mm
Height: 41 mm

Passive infrared presence detector, surface-mounting 1 channel light (relay 230 V) Circular detection area 360°, Ø 12 m (113 m2) at 3 m mounting height Extension of the detection area by parallel switching, a maximum ...

... 10 V Mounting: Luminaire Sensors: Light Sensor Current consumption (mA): 0 Mounting, more information: Directly on fluorescent lamp or panel mounted Max load (A): 0 IP Rating options: IP20 Light Sensor Detection ...

... designed to measure levels in liquids such as storm water and wastewater in sump pumps. When the two-wire-loop-powered sensor is connected in series with a DC power supply, the MD 126 generates a 4 to 20 mA output ...

Width: 65 mm
Length: 72 mm
Height: 90 mm

used for the monitored connection of sensors from security technology (e.g. magnetic contacts or glass-breakage sensors) to the ABB i-bus® KNX. The device has four inputs (”zones“) available and can be used as a stand-alone ...

The presence detector also detects movement and switches the light on depending on ambient brightness. Unlike a movement detector, it also switches the light back off when the area is bright enough. As ...

MAXSYS supports passive infrared request-to-exit detector with X-Y Targeting™ and DSP (Digital Signal Processing)

The pet-tolerant external motion detector with anti-mask feature is suitable for the protection of the surrounding areas of residential premises. Installed at a height of between 0.8 m and 1.2 m, the detector ...

... old with the new, too! New Clipsal Smoke Alarms are compatible with older Clipsal Smoke Alarm mounting bases (surface - 755PSMA/2 & 755SMA, or flush - 755FM & 755PFM), making retrofits quick and easy. Smoke alarms ...

Control Specifications Adjustment: Self-Adjusting LED Disable: LEDS Enable/LEDS Disable Manual Time Adjustment: 30s-30m, 6s Test Mode Sensitivity Adjustment: 0 to 100 Pct Sensitivity Factory Preset: Ultrasonic 50 Pct Infrared 75 Pct Single/Multi-Tech ...

Featuring a customisable design and accurate detection, VX Shield is a series of short range outdoor intrusion detection sensors providing reliability, convenience and security.The VXS series is used to generate an early ...

... motorised damper controlled by an occupancy sensor R+ pack: made up of an R+E modulating dampercontrolled by a CO2 sensor Use : 1 single terminal unit per occupancy sensor 4 teminal ...

No-contact proximity switch for controlling automatic swing and sliding doors.

Width: 80 mm
Length: 80 mm
Height: 34 mm

... 15 sensors No maintenance Easy connectivity and data transfer The S-PRE/Day-Night/T sensor is equipped with a Modbus interface, which provides easy setup and integration into large process control ...

Width: 112 mm
Length: 112 mm
Height: 40 mm

... control products in the past 48 years, have recently launched a new generation of presence detectors - the RC851 series which is an indoor ceiling mount presence detectors bring energy saving and automatic ...

Width: 24 mm
Length: 48 mm
Height: 64 mm

... Suitable to use in restrooms, fitting rooms, etc. to monitor occupancy • Indicators can be paired with up to 15 Sensors per channel • Each sensor can transmit to unlimited number of indicators • Service ...

Optical fire detector works on the scattered light principle Automatic self‑monitoring of function and state Individual display for alarm Resting value tracking Easy installation using removable base VdS approval ...

The CO2 & Temperature Sensor is used to monitor room CO2 level, as well as room temperature and humidity. Three colour (green/yellow/red) LCD backlight indicating ventilation requirement based on CO2 measurement Non ...

Width: 50 mm
Length: 36 mm
Height: 36 mm

The ATLAS PLUS KNX motion-brightness detector features a passive infrared sensor that detects any movement within its detection range. It has high immunity to false alarms, electromagnetic fields and ...

... rain. The electronics contain 4 separate switching contacts (allows for independent ventilation lines) The wind and rain sensor is connected to the electronics. This system enables the adjustment of: Wind sensitivity, Heating ...

Width: 12 cm
Length: 12 cm
Height: 4 cm

brennenstuhl®Connect WiFi Smoke and Heat Detector WRHM01 with app notification and piercing alarm signal 85 Db (WLAN smoke detector including 2x batteries, tested according to EN 14604) The brennenstuhl®Connect ...

Length: 85 mm
Height: 118 mm

Air quality sensor for measuring CO2, mixed gas (VOC), optionally temperature and humidity outdoors and in areas requiring high IP protection class (e.g. underground stations, tunnels, exhibition halls, cold chains and ...