DIN rail modules and controllers

. Can be used for all power supply conditions . Self-learning control program for long enable times . Different operating modes can be programmed via weekly timer . Graphic touchscreen display for easy operation . OD system, adjustable . ...

. Electronic group control unit for AC charge controllers . Mounting on top hat rail, for installation in the sub-distribution board APPLICATION: Group controller for apartment buildings. Individual adjustment of the signal from the ...

The MyHOME_Up load control system manages the maximum power used, automatically disconnecting the less important appliances (which we decide as such) in the event of an overload through the actuators to avoid blackouts. The system ...

BTDIN is the range of modular Btdin is the range of modular equipment for installation on Din 35 rail, such as to satisfy every need for protection, command and management of the system. BTDIN circuit-breakers are widely used in domestic ...

The practical and flexible range dedicated to photovoltaics can satisfy all residential and service needs, up to the large photovoltaic field. Designed to guarantee simple and quick connection and commissioning, the proposal complements ...

Certified by VDE SMART LIGHT CONTROL Conveniently switch up to four connected lights via independent channels on and off, for the perfect ambient lighting in your smart home. EASY TO INSTALL Mounting to standard DIN rails is ...

FLEXIBLE APPLICATION WITHIN THE SMART HOME The switch circuit board can be used in almost all areas of a smart home. It is suitable for switching conventional domestic appliances, lighting installations or garage door drives. Connected ...

Thanks to the high measuring accuracy even stand-by loads can be precisely measured Compact design offers easy installation in flush-mounting boxes or in surface-mounted junction boxes (e.g. ELS Spelsberg Abox 25) Comfortable control ...

Multichannel universal dimming actuator optimised for dimming retrofit LED lamps (LEDi). Also suitable for dimming incandescent lamps, low-voltage halogen lights with conventional or electronic transformers, 230 V halogen lamps and dimmable ...

Switches (6A-AC3) 2 independent electrical consumers via ABB i-bus® KNX with floating contacts. Manual operation and switch-position indicator. No power supply is required. Suitable for switching resistive, inductive and capacitive loads.

Switches (6A-AC3) 8 independent electrical consumers via ABB i-bus® KNX with floating contacts. Manual operation and switch-position indicator. No power supply is required. Suitable for switching resistive, inductive and capacitive loads.

The new Type 13.21.8.230.B000 multifunction relay is for integration into the Finder YESLY Smart home system. It features a volt-free 16A output contact, has the same functions as 13.22 and allows use with pushbuttons connected to ...

Primary current: 5 A - 80 A
Voltage: 230, 400 V

The 7M Series of energy meters are characterized by an innovative design, a backlit LCD display and NFC programmability through the dedicated Finder Toolbox NFC app. The new range of 7M Series energy meters comprises: -Five bi-directional ...

The 10 Series light dependent relays allow the lights to be switched on or off according to the natural lighting level and the set amount of LUX. This makes them ideal for the efficient control of street lighting or in public areas such ...

Input voltage: 24 V
Output voltage: 24 V
Current: 2.5 A

For Busch-priOn Buscoppler. The MDRC device supplies a regulated output voltage of 24 V DC with a maximum output current of 2.5A Dimensions Product Net Depth / Length:57.5 mm Product Net Height:91 mm Product Net Width:71 mm Product ...

Input voltage: 265 V
Output voltage: 28 V

The device is used for on site commissioning of KNX devices should KNX system voltage be unavailable. The most important functions of a KNX device with manual operation can be tested. Dimensions Product Net Depth / Length:55 mm Product ...

Input voltage: 12 V
Output voltage: 12 V
Current: 2 A

delivers sufficient power for all types of demanding applications with a buffered output voltage of 12 V DC (SELV) and a maximum output current of 2 A. Operating malfunctions of the power supply are signalled via a changeover contact ...

4 channel DMX driver/dimmer for 350-1000mA constant current LED products. Drives RGB, RGBW, RGBA or 4 channels of single colour products. 2-12 LEDs per channel, depending on your choice of external power supply. 16 bits dimming curve ...

4 channel RGBW/RGBA DMX driver/dimmer for 12 24 VDC LED products. Maximum 5A per channel with a maximum total current of 10A. 16 bits dimming curve for extremely smooth dimming. DIN rail track mount system. Digital setting of DMX ...

Adaptor for mechanical controls to KNX with 4 and 4 digital outputs (SELV) 4 extra-low voltage (SELV) digital inputs module for connecting conventional pushbuttons or switches. This device has programmable inputs for working simultaneously ...

KNX – DAIKIN HVAC domestic gateway Gateway between KNX protocol and DAIKIN® air conditioning system. It allows the integration of a domestic DAIKIN® climate unit with five operating modes (auto, heat, cold, ventilation and dehumidification) ...

KNX – LG HVAC air conditioning gateway Gateway for integration of LG air conditioning system with KNX control system. Connection to external LG units bus RS485. Control up to 64 LG indoor units. • Supply: 230V AC • Max. Power Consumption: ...

Small Form-factor Pluggable (SFP) Technical data: Data rate: 1000MBit/s Wavelength: 1310nm Distance: 10km Connector: LC and LC-Dupelx with PC ground joint (Physical Contact, 0°) Fiber: Single mode (SM): 2xSM Temperature: AC-SFP: -40°C ...

This industrial media converter was specially developed for applications with high data loads, such as video over IP, video streaming. The compact design, the wide temperature range and the high flexibility make this media converter ideal ...

Being developed for tasks with high data volume, this layer 2/3 switch with L3 fonctions is suitable for example for video over IP and video streaming in connection with multicast as well. IP-cameras are supplied by PoE through the data ...

Input voltage: 35 V - 37 V
Output voltage: 36 V
Current: 1 A

Line driver module for DUO video imtercom systems. It allows to use third party regulated power supoply units as power source for DUO bus, providing even the correct line impedance.

Input voltage: 127 V - 230 V
Output voltage: 29 V
Current: 0.5 A

The power supply can power all devices with a proper audio, video and data impedance for the correct operation of the DUO system.

Input voltage: 127 V - 230 V
Output voltage: 21 V
Current: 1 A

Power supply for video 4+1 installations with electronic note call; it allows to supply in timer mode the system (about 100 sec.). Outputs protected against overloading and short circuits, able to supply timed power to 1 camera unit and ...

KNX electronic digital switch for the management of electrical loads. It allows the time programming (daily, weekly, monthly or yearly) or astronomical. It allows to control 9 different channels on the KNX bus; the programming of channel ...

Interface for the bidirectional data connection between a PC or laptop and a KNX bus installation. It enables addressing, parameter setting, visualization, protocolling and diagnosis of KNX bus devices through ETS (Engineering Tool Software). ...

Primary current: 0 A - 80 A
Voltage: 230, 240 V

80A single phase compact energy counter for the measurement of the energy and the main electrical parameters in industrial and civilian application. Optical port for communication with other systems and the Modbus RS485 (EK-MC1-MD) and ...

Output voltage: 42 V

• Power supply unit for the SmartControl Hub and the Smart TOUCH and Smart LED control units, for installation in the distribution box • 42 V operating voltage, can control up to 6 SmartFan units with 1 power supply unit • Option to expand ...

Output voltage: 42 V

• Power supply unit for Smart TOUCH, Smart LED control units and SmartControl Hub, flush mounted installation • 42 V operating voltage, can control up to 6 SmartFan units with 1 power supply unit • Option to expand to up to 12 SmartFan ...

Output voltage: 12 V

• Power supply unit for easy PUSH and easy rotary selector for installation in distribution panel • 12 V operating voltage, can control up to 6 easyFan units

Automatic illumination. Photo-electric lighting controller NightMatic 2000, for controlling lighting systems for building fronts, properties, shop windows etc., automatically switches light 'ON' at dusk automatically 'OFF' again at dawn. It's ...

Intelligent lighting control. NightMatic 5000-2 photo-electric lighting controller for indoors and out, ideal for illuminating shop windows, advertising and specific areas through the night, switches light 'ON' and 'OFF in relation to ...