Fast recovery, high volume Tank-in-Tank hot water storage
Tank-in-Tank floor standing indirect hot water storage tank.
Stainless steel construction - no need for sacrificial anodes.
High performance - fast heat up and rapid recovery.
Fully insulated - 120mm Rock wool insulation.
Stove enameled steel casing, supplied seperatley to enable the tank to pass through standard 800mm doorways.
Two sizes - 800 and 1000 litres.
Can be used in battery formation for high output installations.
Large heating surface area means reduced boiler cycling.
Anti-Legionella : Storage temperature > 60 ° C.
Constructive characteristics
Capacity (total) - 800 - L
Capacity (primary) - 125 - L
Weight (empty) - 360 - kg
Max operating temperature - 85 - °C
Max operating pressure heating (primary) - 4 - bar
Max operating pressure (DHW) - 8,6 - bar
Primary flow (EN 12897:2016) - 2,08 - L/s
Connection - primary - 2 F - Ø"
Connection - DHW - 1 ½ M - Ø"
Connection - re-circulation / safety valve - 1 ½ M - Ø"
Heating characteristics
Reheat time (EN 12897) - - - min
Reheat performance (EN 12897:2016) - 82 - kW
Max absorbed heat (Heat source: boiler) - 100 - kW
Domestic hot water performance
Peak flow at 40°C - 1881 - L/10’
Peak flow 1st hour at 40°C - 4270 - L/60’
Continuous flow at 40°C - 2868 - L/h
Peak flow at 45°C - 1612 - L/10’
Peak flow 1st hour at 45°C - 3660 - L/60’
Continuous flow at 45°C - 2458 - L/h
Peak flow at 60°C - 961 - L/10’
Peak flow 1st hour at 60°C - 2124 - L/60’
Continuous flow at 60°C - 1395 - L/h
Coefficient (NL) - 67