condensing, for water heaters, with integrated storage tank
Certifications
class A
Power
Min.: 4.9 W (16.72 BTU/h)
Max.: 24.3 W (82.92 BTU/h)
Length
600 mm (24 in)
Width
708 mm (28 in)
Height
1,780 mm (70 in)
Weight
177 kg (390.2 lb)
Water heater capacity
196 l (51.8 gal)
Description
Product overview
Commercial combi boiler combining all the benefits of domestic combi boiler technology while comfortably meeting peak commercial domestic hot water (DHW) demands.
Tank-in-tank technology for hot water production.
Operates on Natural Gas and LPG (supplied with LPG kit for simple on-site conversion).
5-Year Warranty.
ErP Class A; NOx levels significantly under 40 mg/kWh and operating efficiencies well above Part L (2022) minimum requirements.
Internal time clock offering up to 6 programmes within a 24-hour period for fuel usage management.
Multiple control options: On/Off, 0-10V power or temperature control; BMS communication via Modbus.
Corrosion-resistant stainless steel heat exchanger and stainless steel tank to reduce maintenance and increase lifespan.
Suited to high-demand and critical hot water premises such as hotels and hospitals.
Operates in condensing (most efficient) mode for both heating and hot water.
Integrated legionella protection.
BIM & CAD objects available.
Schematics / Main components
Concentric flue gas/air inlet box
Flue gas exhaust tube
Combustion chamber
Stainless steel heat exchanger
Stainless steel "Tank-in-Tank" hot water production tank
Primary circuit separation disc
Indirect water pre-heater
Insulation
Condensate recovery dish + NTC5 sensor (flue gas)
High efficiency circulator pump
NTC2 sensor (CH return)
Electrical panel (with spare fuses at the back)
ACVMax Touch Control panel
On-Off switch
DHW tank dry well (dip tube with temperature sensor)
Automatic air vent
Gas pipe
NTC1 sensor (CH supply)
Gas valve
DHW safety valve (T&P relief valve - UK only)
Modulating air/gas premix burner with fan
Air inlet
DHW outlet
DHW recirculation tube
Key features and benefits
Space and time saving solution: no separate boiler and hot water cylinder required.
Low NOx emissions (NOx weighted (GCV) 24.6 mg/kWh for this model).
High combustion and seasonal efficiencies (combustion efficiency 98.2%, seasonal space heating efficiency 93%).
Quiet indoor sound power level (60 dB LWA).
Multiple ancillary and control accessory compatibility (room thermostats, room controllers, sensors, MCBA, etc.).
Caractéristiques / Spécifications techniques
Model designation: HeatMaster 25 Evo 2
Manufacturer / Brand: ACV
Part number (P/N): 554252
GTIN / EAN: 5400891542521
Capacity (total): 196 L
Capacity (primary): 100 L
Capacity (domestic hot water): 96 L
Chimney: Max pressure drop in flue pipe: 130 Pa
Chimney: max length of concentric flue pipe: 20 m
Chimney connection: 80/125 Ømm
Connection - heating: 1" F
Connection - DHW: 1" M
Connection gas: 3/4" M
Connection - re-circulation / safety valve: na / 1" F
Connection - safety valve: 1/2" M
Max operating temperature: 87 °C
Water pressure drop boiler at Δt = 20°C: 3 mbar
Max service pressure heating (primary): 3 bar
Max service pressure (DHW): 8.6 bar
Height when tilted: 1880 mm
Weight (empty): 177 kg
Pre-heating time from 10 to 80°C (heat source: boiler): 35 min
Reheat time from 40 to 90°C: 30 min
Reheat time from 40 to 80°C: 22 min
Heating time from 10 to 90°C: 43 min
Input max (heating) HCV: 27.8 kW
Input max (heating) LCV: 25 kW
Combustion efficiency: 98.2 %
Efficiency at 30% load (EN15502-1): 109.0 %
Efficiency at 100% load (50/30°C): 103.9 %
Efficiency (max output) 80/60°C: 98 %
Efficiency (min output) 80/60°C: 98 %
Efficiency DHW mode ΔT 30K: 105.4 %
CO emissions max output: 27 ppm
CO emissions min output: 6 ppm
Mass rate of combustion products (gas): 42 kg/h
NOx weighted (GCV) (EN15502): 24.6 mg/kWh
NOx class (EN15502): 6
Output power max (80/60°C): 24.3 kW
Output power min (80/60°C): 4.9 kW
Gas flow rate (min output): 0.52 m³/h
Domestic hot water performance - Peak flow at 40°C: 361 L/10'
Domestic hot water performance - Peak flow 1st hour at 40°C: 1018 L/60'
Domestic hot water performance - Continuous flow at 40°C: 788 L/h
Domestic hot water performance - Peak flow at 45°C: 301 L/10'
Domestic hot water performance - Peak flow 1st hour at 45°C: 865 L/60'
Domestic hot water performance - Continuous flow at 45°C: 676 L/h
Domestic hot water performance - Peak flow at 60°C: 183 L/10'
Domestic hot water performance - Peak flow 1st hour at 60°C: 577 L/60'
Domestic hot water performance - Continuous flow at 60°C: 473 L/h
Electrical characteristics - Voltage: 230 V
Electrical characteristics - Frequency: 50 Hz
Electrical characteristics - Protection IP: IP20
Electrical characteristics - Electrical consumption: 101 W
Electrical characteristics - Electrical power requirements: 0.7 A
Eco Design - Space heating energy efficiency class: A
Eco Design - Seasonal space heating efficiency (35°C): 93 %
Declared load profile: XXL
Water heating energy efficiency class: A
Water heating energy efficiency [ηwh] (EU 814/2013 Art 2 (15) Ann.IV-3): 93.2 %
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.