Fiberglass reinforcing fiber POLITES 80

for wallfor armaturesflaw

Fibreglass reinforcing mesh for use on internal and external plasters Glass fibre reinforcement with a grammage of 80 g/m² Polites 80 is a fiberglass mesh used as reinforcement for Argacem finishing plasters to prevent cracks caused by the settlement of the substrate below. It provides adequate capacity to withstand impact and counteract the stresses due to thermal shock & curing, thus preventing the formation of cracks on Argacem HP finishing plaster. It is also suitable with smoothers applied on panels for thermal and acoustic insulation. It is supplied in 1.00m x 50m rolls (white colour). Where to use it Polites 80 should always be used locally at all stress points (corners of openings, around power sockets/boxes, over conduits etc) embedded within Argacem HP, Argatherm and Argatherm Acoustix. Yield –1.00 m²/m² = 10.76 ft²/ft² An overlap of at least 3 cm is recommended. Packaging 50 x 1 m Roll Drying time No need to dry out Technologically superior fiberglass meshes for reinforcing waterproofing, plasters and liquid sheaths of all kinds. • Quick and easy to apply. • High longitudinal and transversal tensile strength. • Resistant to alkali. • Prevents the formation of cracks.