temperature weather station / precipitation / wind speed
SUNTRACER KNX SL
temperature, precipitation, wind speed
The weather stations "Suntracer sl" for the KNX building bus system measure temperature, wind speed, brightness and recognise precipitation.
All values can be used for the control of limit dependent switching outputs. States can be linked via AND logic gates and OR logic gates. Multifunction modules change input data as required by means of calculations, querying a condition, or converting the data point type. The integrated shade control system allows intelligent sun protection control of up to 8 façades.
The compact housing accommodates the sensors, evaluation circuits and bus-coupling electronics.
N° 70154 Suntracer KNX sl with air pressure sensor, GPS receiver and shading control for 8 facades (with tracking of the slats and shadow edge)
N° 70155 Suntracer KNX sl light GPS receiver and shading control for 5 facades
N° 70156 Suntracer KNX sl basic
KNX weather station with sensors for brightness, wind, precipitation, temperature. Multifunctional modules, logic gates. Optional with time reception (solar postion), shading control, timer, air pressure sensor
Brightness measurement(current light strength)
Wind measurement: The wind strength is measured electronically and thus noiselessly and reliably, even during hail, snow and sub-zero temperatures. Even turbulent air and rising winds in the vicinity of the device are recorded
Precipitation detection: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends
Frost protection for shading systems