The Pyranometer KNX PY measures global irradiance, which is perceived as heat. The measured current irradiance (watts per squaremetre) allows for drawing conclusions on the energy input to an area during a defined period of time (kilowatt hours per squaremetre). Both values can be read out by the KNX PY. Four switching outputs with adjustable threshold values as well as additional AND and OR logic gates are available.
The sensor system, the evaluation electronics and the electronics of the bus connection are mounted in a compact housing.
The sun intensity is applied e. g. to use shadings as heat protection. Another field of application are solar thermal systems (preparation of domestic hot water). The threshold value of irradiation then defines, when it pays of to activate the water pump.
KNX Pyranometer (Global Irradiance Sensor) for Measurement of Solar Intensity
Measurement of global irradiance: The current irradiance is measured (W/m²). The energy input to an area during a defined period of time can be read out (kWh/m²)
4 switching outputs with adjustable threshold values (Threshold values can be set by parameter or via communication objects)
2 AND and 2 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits Configuration is made using the KNX software ETS
White / Transparent
approx. 96 × 77 × 118 (W × H × D, mm)
approx. 145 g