Home automation system radio remote control REMO KNX RF

for ventilation systemKNX

The colour touchscreen of Remote control Remo KNX RF can be used to manually to control bus participants in the KNX system. Remo KNX RF uses the KNX RF S standard. The possible functions are - Switch - Dimm - Move the drives of awnings, shutters, blinds or windows - Change the temperature (for heating/cooling) - Change RGBW light colour - Change light colour temperature - Call and save scenes - Operate media equipment - Indicate bus values (e.g. status, sensor values). The channels are set in the ETS. However, they can be individually sorted and named on the display. Remote control for KNX RF, hand-held transmitter with touch display Operation via the touch display Lithium battery, chargeable via a USB-2.0 Micro-B charger (Charger No 10155 as an optional accessory). Battery level status and a warning at <20% battery charge can be sent via the bus 32 channels, wireless standard KNX RF, S-Mode The touch buttons can be named individually, directly on the device or in the ETS The display sequence can be changed directly on the device Setting functions on the display can be locked (and unlocked) via the application and the bus Configuration is made using the KNX software ETS 5 If communication with wired KNX devices (KNX TP) is necessary, a media coupler that connects KNX RF and KNX TP is needed (e.g. KNX RF LC-TP No 70701) Housing Plastic Colour black Protection category IP 40 Dimensions approx. 64 x 122 x 11 (B x H x T, mm) Display colour TFT, capacitive, dimmable, resolution 320 x 480 Pixel Weight approx. 100 g Ambient temperature operating 0…50 °C, storage -10…+60 °C Ambient humidity max. 95 % RH, avoid condensation