Insulating varnish ISO-TPL

self-primingprotectivefinishing

Application
For new and renovation coating of stairs and parquet or wooden floors (floorboards, OSB, MDF and multi-layer boards) in residential interior areas with normal wear. Also suitable for interior wooden components such as shelves, tables, furniture and railings. For solid wood and wood-based materials.

Product properties

• One-pot system (primer, intermediate and finishing coat) — no insulating primer required
• Excellent flow and surface finish
• Odourless and quick-drying (two coats possible in one day)
• Colourless variant emphasises the wood grain
• High abrasion resistance and long durability
• Good water and cleaning resistance
• High yield
• Emission-tested according to AgBB scheme
• Resistant to saliva and sweat simulant (DIN 53 160 parts 1 & 2)
• Tested according to EN 71-3 (safety of children's toys)
• Slip resistance class R11 achievable with Additive R
• Blocks penetration of wood ingredients

Binder base
Special acrylate dispersion


Degree of gloss
Semi-matt, matt


Drying
23 °C, max. 60% rel. humidity
Dust-dry: 1 hour
Recoat: after 3–4 hours
If insulating effect required: after 6–8 hours
Full stress capacity: after 3 days
Values may vary depending on temperature and humidity


Spreading rate
Normal application rate: approx. 120 ml/m²
Best flow at approx. 150 ml/m²
Final coat with slip resistance: approx. 100 ml/m²


Type of application

• Brushing: use a brush with plastic bristles
• Rolling: dense microfibre pile, pile height max. 10 mm
• Spraying: dilute with up to 10% water; max. wet film thickness 200 µ
• For more details: see Technical Datasheet

Shade
Colourless
White, similar to RAL 9016
Jansen MIX


Field of application
Interior


Package size
750 ml, 2.5 l


Technical specifications

• System: One-pot (primer, intermediate and finishing coat)
• Binder: Special acrylate dispersion
• Degrees of gloss available: Semi-matt, matt
• Drying (23 °C, max. 60% RH): dust-dry 1 h; recoat 3–4 h; insulating effect 6–8 h; full stress capacity 3 days
• Typical consumption: 100–150 ml/m² depending on coat and finish (normal ≈120 ml/m²)
• Application methods: brushing, rolling (dense microfibre), spraying (dilute up to 10% water)
• Properties: odourless, quick-drying, excellent flow and surface finish, high abrasion resistance, good water and cleaning resistance
• Standards & tests: Emission-tested (AgBB); saliva and sweat simulant resistance DIN 53 160 parts 1 & 2; EN 71-3 tested
• Slip resistance: R11 achievable by adding Additive R
• Blocks penetration of wood ingredients
• Available shades: colourless, white (~RAL 9016), Jansen MIX
• Packaging: 750 ml and 2.5 l