Plaster primer PRIMER HS

for concretepolymer resinexterior

Application
Isolating and priming coat for wax, tar, water, smoke, soot, grease and nicotine stains. Styrofoam is not affected. Insulates marks from most felt-tip pens. Suitable for priming absorbent substrates such as gypsum, concrete and fibre cement.

Product properties
Fast-drying with good insulation and sealing performance. Contains grip additive to improve roll-over during application.

Binder base
Polymerisate resin

Degree of gloss
Matt

Drying
(23 °C, 60% relative humidity) Dust-dry: approx. 60 minutes; Touch-dry: approx. 90 minutes; Re-coatable: after 3–4 hours. Drying time may vary depending on film thickness.

Spreading rate
Approx. 8–10 m²/l per coat

Type of application
Brush, short-pile roller.

Shade
White

Field of application
Exterior, interior

Package size
375 ml, 750 ml, 2.5 l

Characteristics / technical specifications

• Application: Isolating and priming coat for problematic stains (wax, tar, water, smoke, soot, grease, nicotine)
• Styrofoam compatibility: Styrofoam is not affected
• Insulation capability: Insulates marks from most felt-tip pens
• Product properties: Fast-drying; good insulation and sealing performance; contains grip additive
• Binder base: Polymerisate resin
• Degree of gloss: Matt
• Drying (23 °C, 60% RH): Dust-dry ≈ 60 min; Touch-dry ≈ 90 min; Re-coatable ≈ 3–4 h
• Spreading rate: Approx. 8–10 m²/l per coat
• Application methods: Brush, short-pile roller
• Shade: White
• Field of application: Exterior and interior
• Available package sizes: 375 ml, 750 ml, 2.5 l