Insulating paint ISOLIERFARBE LHindoorfor panelsfor wood
Add to favorites
Compare this product
Characteristics
- Function
- insulating
- Location
- indoor
- Application
- for panels
- Support
- for wood, for concrete, plaster, for coatings
- Component
- expanded polystyrene, solvent-based
- Finish
- stained
- Color
- white
- Options
- for wet rooms
- Number of coats
- two coats
- Wash resistance
- class 2
Description
Overview
Quick-drying solvent-based interior wall stain-blocking paint with strong sealing effect. Usually one generous coat is sufficient to permanently cover and isolate stains such as water marks and nicotine deposits. Fast drying enables efficient work.
Application
Jansen Isolierfarbe LH can be applied without prior priming to sound, dry substrates. Typical substrates: plaster, masonry, concrete, gypsum board, wallpapers, expanded polystyrene, textured paper/vinyl wallpapers, old dispersion coatings, wood, etc. Also suitable for contaminated substrates with nicotine, soot and dried water stains. Can be used on polystyrene rigid foam boards. Not suitable for bakeries and wet rooms. Do not use in sensitive areas without sufficient drying times.
Product properties
Binder base
Alkyd resin
Gloss level
Matt
Drying (20 °C, 65 % rel. humidity)
Coverage
Approx. 6 m²/l depending on substrate
Application methods
Brushing, rolling, spraying (Airless). Airless: spray angle 40–80°, nozzle 0.017, pressure 150–180 bar. Undiluted.
Colour
White; can be tinted with up to 5% universal tinting pastes (possible pigment bleeding; pre-test recommended). Tinting may alter technical data.
Use
Interior
Pack size
18 kg
Characteristics / Technical specifications
Quick-drying solvent-based interior wall stain-blocking paint with strong sealing effect. Usually one generous coat is sufficient to permanently cover and isolate stains such as water marks and nicotine deposits. Fast drying enables efficient work.
Application
Jansen Isolierfarbe LH can be applied without prior priming to sound, dry substrates. Typical substrates: plaster, masonry, concrete, gypsum board, wallpapers, expanded polystyrene, textured paper/vinyl wallpapers, old dispersion coatings, wood, etc. Also suitable for contaminated substrates with nicotine, soot and dried water stains. Can be used on polystyrene rigid foam boards. Not suitable for bakeries and wet rooms. Do not use in sensitive areas without sufficient drying times.
Product properties
- Low odour
- Overpaintable with dispersion (water-based) paints
- Solvent-based
- Vapour-permeable
- Easy to apply
- Low yellowing
- Abrasion-resistant
- Wet abrasion class 1
- Hiding class 2 at 6 m²/l
Binder base
Alkyd resin
Gloss level
Matt
Drying (20 °C, 65 % rel. humidity)
- Dust dry: approx. 2 hours
- Tack-free: approx. 4 hours
- Recoatable with itself: approx. 12 hours
- Recoatable with water-based interior paints: approx. 24 hours
- Fully cured: approx. 3 weeks
- Stain sealing: reliable isolation of stains with two generous undiluted coats; allow 12 hours between coats
- At low temperature and high humidity, these times are extended
- Final curing is reached after approx. three weeks due to high-solid technology
Coverage
Approx. 6 m²/l depending on substrate
Application methods
Brushing, rolling, spraying (Airless). Airless: spray angle 40–80°, nozzle 0.017, pressure 150–180 bar. Undiluted.
Colour
White; can be tinted with up to 5% universal tinting pastes (possible pigment bleeding; pre-test recommended). Tinting may alter technical data.
Use
Interior
Pack size
18 kg
Characteristics / Technical specifications
- Product name: Isolierfarbe LH
- Brand: Jansen
- Binder: Alkyd resin
- Gloss level: Matt
- Wet abrasion: Class 1
- Hiding: Class 2 (at 6 m²/l)
- Coverage: approx. 6 m²/l
- Application methods: Brush, roll, spray (Airless)
- Pack size: 18 kg
- Recommended drying times: see Drying
Catalogs
No catalogs are available for this product.
See all of jansen‘s catalogsOther jansen products
Isolating lacquers-Tie coatings
Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.