flooring screed mortar / fixing / for tiles / fiberglass-reinforced
MASSETTOMIX PARIS 2.0
for tiles, for flooring screed
FIBRE-REINFORCED, CONTROLLED-SHRINKAGE, RAPID DRYING SCREED WITH HIGH THERMAL CONDUCTIVITY
FOR HEATED FLOORS AND THIN SCREEDS. SUITABLE TO TAKE ALL TYPES OF ADHESIVE FLOORING
Massettomix Paris 2.0 is a fibre-reinforced mortar of semi-dry “damp soil” consistency for internal use as a screed.
It is premixed and bagged, ready for use after mixing with only water.
• Screeds that incorporate water or electrical underfloor heating, or in cooled floors.
• Screeds covering large areas.
• Screeds in general, including those of reduced thickness.
For internal use only
High thermal conductivity
Thanks to its specific formulation, which includes rust proof metal fibres, it has a high coefficient of thermal conductivity (λ = 2.02 W/mK) that gives better heat transmission in
heated floor systems, i.e. it reduces operating costs and improves comfort levels.
Its rapid drying time enables moisture-sensitive flooring (parquet, carpet, vinyl, etc.) to be laid after only 7 days (on a thickness of 50 mm).
Early start-up of underfloor heating systems
Underfloor heating can be turned on after only 7 days.
Ideal for large surfaces
Its extremely low shrinkage enables large areas to be laid without joints (up to 150 m2).
Can be used in reduced thicknesses
Thickness from 2 cm if it is bonded to a supporting layer or from 3 cm if it's unbonded. It does not require mesh reinforcement.
Strong, stable, durable, and CE-marked
It has high compressive strength (25 MPa), is CE-marked (EN 13813), is dimensionally stable and durable.
This is a 100% mineral non-combustible product (Euroclass fire rating – A1) that is safe.