- Products
- REPLIK
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Parapet PARA4
Add to favorites
Compare this product
Description
DESCRIPTION
DIMENSIONS AND PACKAGING
Geometric dimensions (cm):
length: 100
width: 35
thickness (cm): 35
weight (kg/U): 276
Packaging (U/pal): 6
(one-way pallet 110×90)
TECHNICAL SPECIFICATIONS
INSTALLATION
The provisions of standard NF P 98 335 and the CCTG booklet 29 prevail.
– Install between +5°C and +30°C on a sound substrate.
– Mortars are prepared or supplied as the work progresses.
– The bedding mortar is levelled with a straightedge and applied progressively. Its thickness should be as uniform as possible (~4 cm).
– Slabs must be moistened, especially in hot weather.
– During installation, mix products of different colours and batches to avoid visible grouping.
– Joints are formed between slabs; joints are filled with mortar no sooner than 24 h and no later than 72 h after laying. Joint width should be as small as possible without being less than 5 mm.
– Immediately after jointing, the surface must be cleaned to avoid any film or deposit on the slabs.
– Movement joints must be provided in accordance with regulatory requirements (10 m linear or 20 m²).
MAINTENANCE
Original colours are very stable. Minimal maintenance is required; application of a mineralising product will facilitate cleaning and prolong the original surface appearance. The use of high-pressure cleaners or acidic products is not recommended. De-icing salts should be used sparingly and without stagnant residues.
COLOUR RANGE
Colour range available for the sawn stone finish (shade references and surface variants illustrated by images).
Characteristics / technical specifications
- Parapet 100×35
- FINISH: sawn stone
- Sales unit (U): Unit
- equivalence: 1U = 1 parapet
DIMENSIONS AND PACKAGING
Geometric dimensions (cm):
length: 100
width: 35
thickness (cm): 35
weight (kg/U): 276
Packaging (U/pal): 6
(one-way pallet 110×90)
TECHNICAL SPECIFICATIONS
- Splitting strength (MPa): 5.2
- Water absorption: < 6 %
- Frost/thaw mass loss: 0.758 kg/m²
- Slip resistance: average 62
- Standards: NF – EN – 1340
INSTALLATION
The provisions of standard NF P 98 335 and the CCTG booklet 29 prevail.
– Install between +5°C and +30°C on a sound substrate.
– Mortars are prepared or supplied as the work progresses.
– The bedding mortar is levelled with a straightedge and applied progressively. Its thickness should be as uniform as possible (~4 cm).
– Slabs must be moistened, especially in hot weather.
– During installation, mix products of different colours and batches to avoid visible grouping.
– Joints are formed between slabs; joints are filled with mortar no sooner than 24 h and no later than 72 h after laying. Joint width should be as small as possible without being less than 5 mm.
– Immediately after jointing, the surface must be cleaned to avoid any film or deposit on the slabs.
– Movement joints must be provided in accordance with regulatory requirements (10 m linear or 20 m²).
MAINTENANCE
Original colours are very stable. Minimal maintenance is required; application of a mineralising product will facilitate cleaning and prolong the original surface appearance. The use of high-pressure cleaners or acidic products is not recommended. De-icing salts should be used sparingly and without stagnant residues.
COLOUR RANGE
Colour range available for the sawn stone finish (shade references and surface variants illustrated by images).
Characteristics / technical specifications
- Finish: sawn stone
- Sales unit: Unit (1U = 1 parapet)
- Length: 100 cm
- Width: 35 cm
- Thickness: 35 cm
- Weight: 276 kg / U
- Packaging: 6 U per pallet (one-way pallet 110×90)
- Splitting strength: 5.2 MPa
- Water absorption: < 6 %
- Frost resistance: 0.758 kg/m²
- Slip resistance: average 62
- Standards: NF – EN – 1340
Other REPLIK products
---
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.