Parapet PARA1

Description
Parapet 70×30
STONE BUSH‑HAMMERED FINISH
Sales unit (U) = Unit
equivalence: 1U = 1 parapet

Geometry and packaging
length: 70 cm
width: 30 cm
thickness (cm): 8
weight (kg/U): 38
Packaging (U/pallet): 21 (disposable pallet 110×90)

Mechanical properties
splitting strength (MPa): 5.2
water absorption: < 6%
freeze/thaw resistance: 0.758 kg/m²
slip resistance: medium 62
Standards: NF – EN – 1340

Installation

• Provisions of standard NF P 98 335 and CCTG fascicle 29 prevail.
• Installation should be carried out between +5°C and +30°C on a sound substrate.
• Masonry mortars are prepared or supplied progressively as work advances.
• The bedding mortar layer is leveled with a screed and laid progressively. Its thickness must be as uniform as possible (~4 cm).
• Slabs must be wetted, especially in hot periods.
• During installation, mix products of different colors and batches to avoid visible banding.
• Joints are left between slabs. Joints are filled with mortar no earlier than 24 h and no later than 72 h after laying. Joint width should be as small as possible but not less than 5 mm.
• Immediately after jointing, the surface must be cleaned to avoid film or deposits on the slab surface.
• Expansion joints must be provided in accordance with normative requirements (10 ml or 20 m²).

Maintenance

• Original colours are very stable; minimal maintenance is sufficient and natural patina develops over time.
• Application of a mineralising treatment facilitates cleaning and extends the life of the original surface appearance.
• Use of high‑pressure cleaners or acidic products is strongly discouraged (risk of irreversible alteration).
• De‑icing salts should be used reasonably, avoiding excessive stagnant residues.

Colour range
Colour range available for the stone bush‑hammered finish.

Technical characteristics / specifications

• Appearance: bush‑hammered
• Sales unit: 1 parapet (1 U = 1 parapet)
• Dimensions (cm): 70 x 30
• Thickness: 8 cm
• Weight: 38 kg / U
• Packaging: 21 U / pallet (disposable pallet 110×90)
• Splitting strength: 5.2 MPa
• Water absorption: < 6%
• Freeze/thaw resistance: 0.758 kg/m²
• Slip resistance: medium 62
• Standard: NF – EN – 1340