Building coating 3010T

interiorfor woodfor metal

Outstanding pore filler Application by brush, roller or airless according to dilution Easy to use, cures at room temperature Easy to sand Perfect surface finish and interface for all marine topcoats RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats. The system is easy to apply by spray, roller or brush and is fast drying. A suitable finish is obtained after at least two coats of this system. Suitable for steel, aluminium, GRP and wooden yachts. MIXING Hardener available: 3014T (replaces hardener 3015T). Thinner: RESOLTECH 3018 The resin component should be stirred mechanically prior to mixing with hardener. WARNING: The mixing ratio must be accurately followed. It is not possible to change the ratio, it would result in lower mechanical properties. The mixture should be thoroughly stirred to ensure full homogeneity. SURFACE PREPARATION RESOLCOAT 3010T should be applied onto a prepared surface (see TechNotes#10 for more application information). The surface should be clean, dust-free and degreased. RESOLCOAT 3010T will provide superior adherence onto GRP, metals, RESOLCOAT 8020EX and any laminate. Steel and aluminum surface should be prepared first and the coated with the RESOLCOAT 3010P primer. Defects deeper than 1,5 mm should be filled with 8020 EX filler prior to 3010T application