Repair mortar ECOPAVIPLAST® A+B+C

levelingself-levelingreinforcing

Water-based epoxy mortar Three-component, water-based, semi-self-leveling epoxy mortar for leveling and reinforcing internal floors in the civil sector. Description Three-component product: A - amine resin in aqueous vehicle B - epoxy resin C - pre-packaged based on aggregates and inorganicbinders By mixing the components, the polymerization reaction between the two resins is unblocked and at the same time the effect of organic additives begins. In this way the best features are developed: bottom attachment resilience hardening in the presence of moisture vapour permeability Use Industrial floors. Floors of warehouses and commercial premises. Shaving and infill of deteriorated floors. Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1,5 N/mm2. Preparation of the support Concrete bottoms must be solid, leveled, absorbent, not polluted by oils, dust or other substances. Check the most convenient type of mechanical preparation (abrasive, shot peening or milling) and then apply a shot of PAVIWATER T68. Oily surfaces must be deeply milled and treated by shaving with FLUIDEPOX (1 kg/m2) loaded with QUARZO B0; on the product just applied, sprinkle QUARZO B2 when waste (2 kg/m2). The same solution can be adopted to smooth out any irregularities of the substrate, such as the grooves left by milling, and to consolidate funds that do not guarantee solidity. N.B.: with this treatment the breathability of the coating is reduced.