Tile mortar ECOFER®

for concreteepoxywater-based

Epoxy mortar reinforced with steel granulates (a+b+c) Water-based reinforced epoxy mortar for cover floors subject to heavy surface wear. Description Three-component product: A - amine resin in aqueous vehicle B - epoxy resin C - pre-packaged based on post-treated metal granules and inorganic additives The mortar allows to obtain coatings with high mechanical resistance, hardening in the presence of humidity and excellent permeability characteristics Use Industrial flooring with heavy surface wear. Floors of warehouses and commercial premises subject to high transit. Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1,5 N/mm2. Preparation of the support Concrete bottoms must be solid, leveled, absorbent, not polluted by oils, dust or other substances. Check the most convenient type of mechanical preparation (abrasive, shot peening or milling) and then apply a shot of PAVIWATER T68. Oily surfaces must be deeply milled and treated by shaving with FLUIDEPOX (1 kg/m2) loaded with QUARZO B0; on the product just applied, sprinkle QUARZO B2 when waste (2 kg/m2). The same solution can be adopted to smooth out any irregularities of the substrate, such as the grooves left by milling, and to consolidate funds that do not guarantee solidity. N.B.: with this treatment the breathability of the coating is reduced. Tile bottoms should be shot peened, then treated with a shot of FONDO PER PIASTRELLE. Any tiles not anchored must be removed, restoring with ECOPAVIPLAST suitably loaded with QUARZO B3 (1 to 1 in weight). Uneven surfaces can be flattened by shaving with ECOPAVIPLAST.