Stable filling compound that dries very quickly and is highly tempered with synthetic resin; used for evening out slight irregularities
Special features
can be used without primer
very fine-grained
very quick drying
flexible
very hard, with high strength
Application range
Evens out trowel marks and irregularities on mineral STAUF levelling compounds
Fills joints in dry screeds, for example, or between chipboard or OSB panels, wooden boards and STAUF mechanical detachment underlay panels
Fills small cracks and holes, for example in combination with STAUF glass-fibre fabric
Suitable subfloors
sanded mastic asphalt screed
concrete C 25 / 30 according to DIN 1045 (non-skid surface)
calcium sulphate (flow) floors
Raised access floors
wooden planks, wood fibre boards
STAUF levelling compounds
magnesite and plaster floors
chipboards (P4 to P7), OSB boards (OSB/2 to OSB/4)
stone, ceramic, terrazzo, tiles
unlaminated gypsum fibre boards
cement floors
STAUF mechanical detachment panels
Metallic substrates, such as checker plate
cavity floors
Product properties
suitable on subfloor heating systems
ductile during processing
good adhesion to various materials
suitable for castors swivel chairs according to DIN EN 12529
can be feathered down to zero
coverings can be laid after a very short time
Consumption in g/m² per mm layer thickness
1100g per mm layer thickness
Accessibility/ready for foot traffic
after approx. 20 - 30 minutes at 20 °C and 65% rel. Humidity
Ready for installation
elastic and textile coverings: approximately 0.5 to 1.5 hours