SP540 is a one-part, non-sagging, elastic sealant based on hybrid-polymers. Suitable for use in both indoor and outdoor applications.SP540 is an elastic hybrid sealant for floor joints in pedestrian walkways, warehouses, parking areas. SP540 can be used in both indoor and outdoor applications.
During and after curing, SP540 is chemically neutral and low odour. After total curing the product is permanently elastic while still maintaining a high mechanical strength.
The time for film formation is approximately 35 to 40 minutes. During and after curing, SP540 is chemically neutral, non-corrosive and low odour. After total curing the product is permanently elastic while still maintaining a high mechanical strength. SP540 shows a good resistance to UV light, weather and ageing. The product is free of isocyanates and silicone
Isocyanate & silicone free
Fast curing
Fast tack-free time
Permanent elasticity
High mechanical strength and good abrasion resistance
Excellent resistance to weathering, aging and UV exposure
Joint faces should be clean of dust and free from substances likely to impair adhesion.
Loose friable material must be removed and arrisses made good. Remove loose particles on concrete and plaster joints using a brush.
Metal surfaces should be degreased with solvent.
For a neat finish use masking tape for the joint edges.
Depending on the substrate AT115 and AT200 cleaners are available.
Clean powder coated surfaces with AT115.
It is recommended that preliminary tests are carried out.