The SRR-E angle frame access door is designed for exterior applications where dirt and water are to be prevented from falling into the area below.
SPECIFICATIONS: The security reservoir & roof door shall be model SRR-E as manufactured by U.S.F. Fabrication, Inc. with the size being specified on the plans. Door leaf shall be 1/4-inch thick aluminum diamond plate reinforced for 300 p.s.f. live load. The frame shall be 3/16-inch aluminum structural angle with 7/16-inch diameter holes for bolting to curb or roof deck and have an extruded U-shaped EPDM rubber weatherseal gasket where the cover closes on the frame. The access door shall be equipped with a 316 stainless steel slamlock with fixed exterior and interior handles and interior padlock staple. A 316 stainless steel hold open arm with push/pull handle shall automatically keep the cover in its upright, open position. The door shall have a mill finish and hinges fabricated with aluminum lugs and 316 stainless steel pins. The door shall have stainless steel gas shocks to assist in opening the door and reducing the force during closing. Installation shall be in accordance with the manufacturers attached instructions with others being responsible for providing an effective seal between the frame and the mounting surface. The door shall be manufactured and assembled in the United States. Manufacturer shall guarantee the door against defects in materials and workmanship for a period of ten years.