The wedi Tools tub sealing tape consists of a TPE-coated polypropylene fleece equipped with a butyl strip. It is used for reliable sealing of bathtubs and shower trays made from steel enamel, acrylic or similar.
Stable, rigid lengthwise and elastic crosswise joint sealing membrane
Type - TPE coated polypropylene fleece with butyl strip
Colour - grey
Total width - 120 mm
Coating width - Butyl strip 15 mm width
Total thickness - 1,32 mm
Weight - 60 g/m
Maximum longitudinal tensile strength - approx. 104 N / 15 mm
Maximum lateral tensile strength - approx. 23 N / 15 mm
Elongation at break, longitudinal - ca. 70%
Elongation at break, lateral - approx. 335%
Resistance to water pressure (1.5 bar) - > 1,5 bar
Resistant to chemicals - acc. to ZDB data sheet
Water impermeability - acc. to ZDB data sheet
UV resistance - > 500 h
Temperature resistance - -30°C / +90°C
For secure sealing of tubs and shower trays made of steel, enamel, acrylic or similar.
When sealing, the wedi Tools tub sealing membrane must be bonded onto the tub or shower tray with the butyl strip, and pressed on evenly. The surface seal is attached to the wall using wedi 610 or wedi 520. In the case of installation with wedi 610, the tub sealing membrane should be pressed evenly into the adhesive bed with a roller. In the case of bonding with wedi 520, the front and rear side of the sealing membrane should be embedded in filler.
Store in a cool, dry place and protect from sunlight.